User manual

4.2 Display
A B C D
EFGHIJKL
A) : The delay start indicator
B) Washing indicators:
• : The prewashing phase
• : The washing phase
• : The rinses phase
• : The spin phase
When a programme is
set, all the indicators of
the phases related to the
programme come on.
When the programme
starts, only the indicator
of the phase in operation
flashes. When a phase is
complete the indicator of
the phase remains on.
When the programme is
completed, the symbol of
the last phase is on.
C) : The door locked indicator
•
You cannot open the appliance
door when the symbol is on.
• You can open the door only when
the symbol goes off.
D)
Clock indicator:
After the programme has started, the
duration is displayed and the clock
icon is animated.
E) The time area:
• The programme duration:
After selecting a programme, the
duration is displayed in hours and
minutes (e.g. ). The duration is
calculated automatically on the
basis of the maximum
recommended load for each type
of fabric. After the programme has
started, the time remaining is
updated every minute.
• The programme end:
When the programme has finished
three flashing zeros are displayed,
the
indicator disappears and
the door can be opened.
• Alarm codes:
In the event of operating problems,
some alarm codes can be
displayed, e. g. (refer to
chapter «Troubleshooting.»).
If an option which is not
compatible with the set wash
programme is selected, the
message is displayed for a
few seconds and the integrated
red light of button Start/Pause
starts flashing.
• Delay time.
F)
Soil degree indicators:
•
: Intensive.
• : Normal/Daily.
• : Light/Quick.
• : Super Quick.
G) : The indicator of the child lock.
H)
Option indicators:
•
: Extra Rinse.
• : Easy Iron.
ENGLISH
7