User manual

Performing a Wash CycleWash Cyclee

Brief guide

A wash cycle consists of the following steps:

1. Open the door and load the washing.

2. Close the door.

3. Add detergent/additives.

4. Set the appropriate wash programme:

– Set the programme and temperature using the

programme knob

– Set additional programme functions as required.

5. Change the Spin Speed / press RINSE HOLD

(Spülstopp, Arrêt Cuvé Pleine) as necessary.

6. Start the wash programme by pressing the

START/PAUSE (Start/Pause, Marche / Pause)

button.

After the wash programme is complete:

Important! If the wash cycle was stopped with Rinse

Hold, select DRAIN (Pumpen, Vidange) or SPIN

(Schleudern, Essorage) before opening the door.

7. Open the door and take out the washing.

The door can be opened after the DOOR (Tür,

Porte) light goes off and the END (Ende, Fin) light

has come on.

8. Switch off the washing machine: Turn the pro-

gramme knob to OFF (Aus, Arrêt).