User manual

31
Setting Up the Unit
3
Washing machines with curved panels are
not suitable for substructures.
Transporting the Unit
• Do not place the washing machine on its front
side or on its right side (looking from the front).
Otherwise the electrical components can get wet.
• Never transport the unit without using the trans-
port safeguard. Do not remove the transport safe-
guard until you reach the installation site.
Transporting the unit without the transport safe-
guard can result in damage to the unit.
• Never lift the unit by the open filling door or by its
base.
• When transporting with the sack trolley: only
place the sack trolley against the side.
Removing the Transit Bars/Bolts
Important Before the appliance is used for the first
time, the transit bars/bolts must be removed. Keep
all the parts of the transit bars/bolts in a safe place in
case they are needed for a later journey (moving
house).
1. On the back of the appliance open both hose
holders and take out hoses and power cable.
2. Remove both hose holders from the appliance by
pulling hard.