User manual

Main switch operation procedure (Applicable to Mechanical Models ONLY)
1.Main Control Knob
Set to Low Cool,Med Cool or High Cool as desired (FAN setting operates the fan only.)
CAUTION:If the main control knob is turned off changed to a fan setting from a cooling operation setting,
2.Thermostat control Knob
3. Air Swing Switch
(Airflow direction adjustment Side-to Side)
To obtain a fix airflow direction, set the air swing switch to “ON” for the vanes to swing
from side to side until the desired flow direction is reached, then switch it to “OFF”.
For continuous side-to-side air circulation, set the air swing switch to “ON”.
WAIT at teast 3 minutes before resetting to cooling operation.
not as desired after a reasonable period, turn the thermostat.When the thermostat control knob is set to 10, moisture
Set the thermostat control knob to your desired setting(Usually 6-7 is recommended). If the room temperature is
evaporator fins so that mormal cooling can be resumed.
may freeze onto evaporator fins and tturn he thermostat control knob counter clockwise. This will quickly defrost the
8