User manual

Name and function of wireless remote control
Note:
This wireless remote control is universal, andit could be used for many
units, some buttons of this control which are not available to this unit will
not be described below.
ENERGY SAVER button
Press this button at unit On or Off status,
Light On and Light Off can be set up.
LIGHT button
LIGHT
After powered on, Light On is defaulted.
Presetting temperature can be increased.
Press this button, the temperature can be
+
+
set up, continuously press this button
and hold for two seconds, the relative
contents can quickly change, until unhold
this button and send the order that the

R
) signal will be displayed all the time.
The temperature adjustment is unava-
ilable under the Auto mode, but the order
can be sent if pressing this button.
Temperature of Celsius degree setting:
16-30; for Fahrenheit degree setting:
61-86.
Presetting temperature can be decreased.
Press this button, the temperature can be
button
button
-
set up, continuously press this button
and hold for two seconds, the relative
contents can quickly change, until unhold
this button and send the order that the

R
) signal will be displayed all the time.
The temperature adjustment is unav-
ailable under the Auto mode, but the order
can be sent by if pressing this button.
Under the Cool and Dry mode, press this
button once, the unit will enter "energy
saver" mode. Repress this button, the
unit will exit "energy saver" mode.
Note: Not applicable for inverter models.
ENERGY
Remote control
SAVER
FAST COOL button
FAST
COOL
10
-
Press the "FAST COOL" button to active
the Fast Cool feature. When Fast Cool is
activated, the air conditioner will
automatically run at the highest fan speed
with the set temperature of 16ºC.