User manual

• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press
and at the same time
for 6 seconds.
If you deactivate the acoustic sig-
nals, they continue operate when
the appliance has a malfunction.
8. BEFORE FIRST USE
1.
Put 2 litre of water in the detergent
compartment for washing phase. This
activates the drain system.
2.
Put a small quantity of detergent in
the compartment for washing phase.
3.
Set and start a programme for cotton
at the highest temperature without
laundry. This removes all possible dirt
from the drum and the tub.
8.1 Language setting
The display has a default language.
The first time you press the button
to
activate the appliance, the display tells
you to change the language setting.
Press
or to set the language you
prefer.
Press
to confirm the language.
If no language is set after several seconds
the appliance operates with the default
language. Until you don’t set a language,
the display asks you to set a language
each time you activate appliance.
Change the language after the first
activation.
Press
or at the same time for some
seconds to enter the language setting.
Press
or to set the language you
prefer.
Press
to confirm the language.
9. DAILY USE
9.1 Loading the laundry
1.
Open the appliance door.
2.
Put the laundry in the drum, one item
at a time. Shake the items before you
put them in the appliance. Make sure
not to put too much laundry in the
drum.
3.
Close the door.
CAUTION!
Make sure that no laundry stays
between the seal and the door.
There is a risk of water leakage or
damage to the laundry.
ENGLISH 13