User manual

If the appliance is

overloaded, remove

some items from the

drum and/or keep

pressed the door and

touch the Start/Pause

button at the same time

until the indicator

stops flashing (see the

following picture).

• Water safety alert - The anti-flood

device is on. Disconnect the

appliance. Close the water tap.

Contact the Authorised Service

Centre.

• Unstable mains supply - The mains

supply is unstable. Wait until the

mains supply is stable.

• Detergent overdosing - Reduce the

detergent quantity.

WARNING!

Deactivate the appliance

before you do the checks.

13.2 Possible failures

Problem Possible solution

The programme does

not start.

Make sure that the mains plug is connected to the mains

socket.

Make sure that the appliance door is closed.

Make sure that there is not a damaged fuse in the fuse

box.

Make sure that the Start/Pause has been pressed.

If the delay start is set, cancel the setting or wait for the

end of countdown.

Deactivate the Child Lock function if it is on.

The appliance does not

fill with water properly.

Make sure that the water tap is open.

Make sure that the pressure of the water supply is not too

low. For this information, contact your local water authority.

Make sure that the water tap is not clogged.

Make sure that the filter of the inlet hose and the filter of

the valve are not clogged. Refer to “Care and cleaning”.

Make sure that the inlet hose has no kinks or bends.

Make sure that the connection of the water inlet hose is

correct.