User manual
Table Of Contents
- CONTENTS
- 1. SAFETY INFORMATION
- 2. SAFETY INSTRUCTIONS
- 3. PRODUCT DESCRIPTION
- 4. CONTROL PANEL
- 5. PROGRAMMES
- 6. CONSUMPTION VALUES
- 7. OPTIONS
- 8. SETTINGS
- 9. BEFORE FIRST USE
- 10. DAILY USE
- 10.1 Using weight sensors
- 10.2 Activating the appliance
- 10.3 Setting a programme
- 10.4 Loading the laundry
- 10.5 Using detergent and additives
- 10.6 Detergent compartments
- 10.7 Liquid or powder detergent
- 10.8 Starting a programme without the delay start
- 10.9 Starting a programme with the delay start
- 10.10 Interrupting a programme and changing the options
- 10.11 Cancelling a running programme
- 10.12 Opening the door
- 10.13 At the end of the programme
- 10.14 AUTO OFF option
- 11. HINTS AND TIPS
- 12. CARE AND CLEANING
- 13. TROUBLESHOOTING
- 14. EMERGENCY DOOR OPENING
- 15. TECHNICAL DATA
9. BEFORE FIRST USE
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Put a small quantity of detergent in
the compartment for washing phase.
4. Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.
9.1 Language setting
The display has a default language.
The first time you press the button to
activate the appliance, the display tells
you to change the language setting.
1. Press
or to set the language
you prefer.
2. Press to confirm the language.
If no language is set after several
seconds the appliance operates with the
default language. Until you don’t set a
language, the display asks you to set a
language each time you activate
appliance.
9.2 Change the language after
the first activation
1. Press and at the same time for
some seconds to enter the language
setting
2. Press or to set the language
you prefer.
3. Press to confirm the language.
9.3 Detergent quantity setting
The text bar also gives the indication
about the detergent quantity, when the
door is closed after the laundry load. By
default, the detergent quantity indication
is given as a percentage. 100% is the
maximum detergent quantity that you
can put in the compartment
of the
detergent drawer.
You can set the indication as ml to have
more precision.
The display can give the indication for 2
types of detergent (powder or liquid):
1. Press and at the same time for
some seconds.
The message “Set dosage det 1” comes
on in the text bar.
2. Press or to set the data as ml
that agrees with 100%. For the
maximum detergent quantity see the
detergent container.
3. Press
to confirm.
The message “Set dosage det 2” comes
on in the text bar.
4. Press or to set the data as ml
that agrees with 100%. For the
maximum detergent quantity see the
detergent container.
5. Press to confirm.
10. DAILY USE
10.1 Using weight sensors
For a correct use of the
weight sensor, the drum
must be empty when
activating the appliance.
Set the programme
BEFORE you put the
laundry in the drum.
10.2 Activating the appliance
Press the button to activate or
deactivate the appliance. A tune sounds
when the appliance is activated.
10.3 Setting a programme
1. Press one of the programme
touchpad to set the necessary
programme:
• The indicator
flashes.
ENGLISH 15