User manual

If the appliance is
overloaded, remove
some items from the
drum and/or keep
pressed the door and
touch the Start/Pause
button at the same time
until the indicator
stops flashing (see the
following picture).
• Water safety alert - The anti-flood
device is on. Disconnect the
appliance. Close the water tap.
Contact the Authorised Service
Centre.
• Unstable mains supply - The mains
supply is unstable. Wait until the
mains supply is stable.
• Detergent overdosing - Reduce the
detergent quantity.
WARNING!
Deactivate the appliance
before you do the checks.
13.2 Possible failures
Problem Possible solution
The programme does
not start.
• Make sure that the mains plug is connected to the
mains socket.
• Make sure that the appliance door is closed.
• Make sure that there is not a damaged fuse in the fuse
box.
• Make sure that the Start/Pause has been pressed.
• If the delay start is set, cancel the setting or wait for the
end of countdown.
• Deactivate the Child Lock function if it is on.
The appliance does not
fill with water properly.
• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is not
too low. For this information, contact your local water
authority.
• Make sure that the water tap is not clogged.
• Make sure that the filter of the inlet hose and the filter of
the valve are not clogged. Refer to “Care and cleaning”.
• Make sure that the inlet hose has no kinks or bends.
• Make sure that the connection of the water inlet hose is
correct.
• Make sure that the connections of the water inlet hoses
are correct.
The appliance does not
fill with water and drain
immediately.
• Make sure that the drain hose is in the correct position.
The hose may be too low. Refer to 'Installation instruc‐
tion'.
ENGLISH 25