User manual

10 electrolux use
Select the required programme
Note!
With the instruction booklet you will
also find stickers for the programme
selector dial. Choose the sticker in the
desired language. Clean the control
panel with a dry cloth to eliminate
duster residue. Remove the back of
the sticker and place it around the
programme selector dial as shown in
the photo.
Turn the programme selector dial to the
required programme.
The Start/Pause light starts to flash and
the Display shows the duration of the
selected programme.
The selector dial is divided into following
sections:
● Cottons
● Synthetics, Delicates,
Easy iron, Wool, Handwash,
Lingerie, Silk, Jeans,
Wool
Hand Wash
Normal
Rinse
Spin
Special
Lingerie
Jeans
Soak
Cottons
Synthetics
Delicates
Easy Iron
Silk
Drain
Eco
Soak.
● Special programmes: Rinses,
Drain, Spin.
The selector dial can be turned either
clockwise or anticlockwise. Position O to
Reset programme/ Switching OFF of the
machine.
At the end of the programme the
selector dial must be turned to
position O, to switch the machine
off.
Attention!
If you turn the programme selector dial
to another programme when the
machine is working, the red
Start/Pause pilot light will flash 3 times
and the message Err will apperar on
the display to indicate a wrong
selection. The machine will not perform
the new selected programme.
Programme Option buttons
Depending on the programme, different
functions can be combined. These must
be selected after choosing the desired
programme and before depressing the
Start/Pause button.
When these buttons are pressed, the
corresponding pilot lights come on.
When they are pressed again, the pilot
lights go out.
Select the temperature
Press this button repeatedly to increase
or decrease the temperature, if you
95º
60º
40º
30º
Temp.
EN002
132979050.qxd 19/09/2007 16.17 Pagina 10