User manual

12
11 “Delay” button
This button makes it possible to delay the starting of
the programme selected from 30 min - 60 min - 90
min, 2 hours and then by 1 hour up to a maximum of
23 hours.The delay you have selected is shown on
the display for about 3 seconds; afterwards, the
duration of the programme reappears.
If the button Soak has been pressed the selected
delay will correspond to the soak time. If no delay
time is selected the soak programme will last about
30 minutes.
You must select this option after you have set the
programme and before you press the Start/Pause
button.
The time value shown on the display will decrease
by one unit every hour.
You can change the delay time at any moment,
before you press the Start/Pause button. Press the
Delay button till the desired delay time appears in
the display. At the end press the Start/Pause button.
If you have already pressed the Start/Pause button,
and you wish to cancel the delay time, proceed as
follows:
• set the washing machine to PAUSE by pressing the
Start/Pause button;
• press the Delay button once, to erase the delay
time. The display will indicate “
0’’”.
• press the Start/Pause button again.
Important!
The door will be locked throughout the delay time.
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the
Start/Pause button. After you have closed the door,
press the Start/Pause button again.
12 Programme phase indicator
lights
When you select a programme, the lights relevant to
the phases that form the programme will light up.
After you have started the programme, only the light
relevant to the phase that is currently being carried
out will remain lit.
Prewash
Wash
Rinses
Spin
Drain