User manual

The display shows the following informa-
tion:
2.1: Temperature value
2.2:
Temperature icons , Cold . If the temperature icon is animated, the appliance is
heating the water in the tub.
2.3: Spin value
2.4: Spin speed icons; during the spinning phase the spiral is animated.
•
No spin
option: it eliminates all the spin phases and increases the number of rinses
for some programmes.
•
Rinse Hold
: the water of the last rinse is not emptied out to prevent the fabrics
from creasing. When the programme has finished the display shows flashing
.
the icon
is still visualized and the light of button 8 is off. The door is locked to indi-
cate that the water must be emptied out. To empty out the water, please read the para-
graph «At the end of the programme».
•
Night Cycle
: the machine will not drain the water of the last rinse, so as not to wrin-
kle the laundry. As all spinning phases are suppressed, this washing cycle is very noise-
less and it can be selected at night or in times with a more economical power rate. On
some programmes the rinses will be performed with more water. When the programme
has finished, the display shows flashing
, the icon is still visualized, the
light of button 8 is off . The door is locked to indicate that the water must be emptied
out. To empty out the water, please read the paragraph «At the end of the pro-
gramme».
2.5:
Option icons: Extra Rinse or Easy Iron .
2.6:
Delay icon : The selected delay set by pressing the relevant button appears on the
display for a few seconds, then the duration of the previously selected programme is dis-
played. The relevant icon is lighted on. The delay time value decreases by one unit every
hour and then, when 1 hour remains, the time decreases every minute.
2.7:
Child safety lock (see «Personalisation» chapter).
2.8:
Door locked icon : after you have pressed button 8 and the machine has started,
this icon is lighted on and only the phase running icon stays on. When the programme has
finished, three flashing zeros (
) are displayed and this icon disappears.
2.9:
• Duration of the set programme: after selecting a programme, the duration is dis-
played in hours and minutes (for example
). The duration is calculated automati-
cally on the basis of the maximum load for each type of fabric. After the programme has
started, the time remaining is updated every minute.
•
End of programme: when the programme has finished three flashing zeros (
)
are displayed. The icon
disappears. The door can be opened.
• Incorrect option selection: if you set an option which is not compatible with the set
programme, the display shows the message Errfor a few seconds. The integrated red
light of button 8 starts flashing.
• Alarm codes: In the event of operating problems, some alarm codes can be displayed,
for example
(see paragraph «What to do if...»).
•
Delay Time value
2.10: Soil degree icons: (see paragraph «Select Time Manager option»).
2.11:
Clock icon : after the programme has started, the duration is displayed and the clock
icon is animated.
electrolux 7