User manual

10.7 Setting a programme
1. Turn the programme knob and set
the programme:
The related programme indicator
comes on.
The indicator of the
flashes.
The display shows the level of the
Time Manager, the programme
duration and the indicators of the
programme phases.
2. If necessary, change the
temperature, the spin speed, the
cycle duration or add available
options. When you activate an
option, the indicator of the set option
comes on.
If you set something
incorrect, the display shows
the message .
10.8 Starting a programme
without the delay start
Press .
The indicator of stops to flash
and stays on.
The indicator starts to flash
on the display.
The programme starts, the door
locks, the display shows the
indicator .
If the indicator
flashes, the door is
locking. If the display
shows an alarm
message after the
indicator has
flashed for a few
seconds, it indicates
that the door is not
properly locked (for
more details see
Troubleshooting
chapter).
The drain pump can operate for a
short time when the appliance fills
water.
After approximately 15
minutes from the start of the
programme:
The appliance adjusts
automatically the
programme duration
agree with the laundry
load.
The display shows the
new value.
10.9 Starting a programme with
the delay start
1. Press again and again until the
display shows the delay you want to
set.
The related indicator comes on the
display.
2. Press
:
The appliance starts the
countdown.
The door locks, the display shows
the indicator .
If the indicator flashes, the
door is locking. If the display
shows an alarm message after
the indicator has flashed for a
few seconds, it indicates that the
door is not properly locked (for
more details see Troubleshooting
chapter).
When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you press the . To
cancel the delay start:
Press to set the
appliance to pause.
Press until the
display shows
'.
Press again to
start the programme
immediately.
www.electrolux.com16