User manual

START PAUSE
This button allows you to start or to inter-
rupt the selected programme.
TIME MANAGER
These buttons allows you to modify the
programme duration automatically pro-
posed by the appliance.
DISPLAY
2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9
2.12 2.11 2.10
The display shows the following informa-
tion:
2.1 Temperature value
2.2
Temperature icon
During the washing cycle the display shows the temperature icon animated to indicate
that the appliance has started the heating phase of the water in the tub.
Cold
2.3 Spin value
2.4
Spin speed icon
During the spinning phase the spiral is animated.
No spin
This option eliminates all the spin phases and increases the number of rinses for some
programmes.
Rinse Hold
The water of the last rinse is not emptied out to prevent the fabrics from creasing.
When the programme has finished the display shows flashing
. The icon 2.8
remains still visualized. The light of button 8 is off. The door is locked. The water must
be emptied out. To empty out the water, please read the paragraph «At the end of the
programme».
Night Cycle
The machine will not drain the water of the last rinse, so as not to wrinkle the laundry.
As all spinning phases are suppressed, this washing cycle is very noiseless. It can be
set at night or in times with a more economical power rate. On some programmes the
rinses will be performed with more water.
When the programme has finished, the display shows three flashing zero (
).
The icon 2.8 remains still visualized, the light of button 8 is off. The door is locked. The
water must be emptied out. To empty out the water, please read the paragraph «At
the end of the programme».
2.5
Option icons (depending on the model)
Extra Rinse option
Easy iron option
2.6
Delay icon
The delay set appears on the display for a few seconds, then the duration of the previ-
ously set programme is displayed. The relevant icon is lighted on. The delay time value
decreases by one unit every hour and then, when 1 hour remains, the time decreases
every minute.
6 electrolux