User manual

2.7
Child safety lock (see «Personalisation» chapter).
2.8
Door locked icon
After you have pressed button 8 and the machine has started, this icon is lighted on
and only the phase running icon stays on. When the programme has finished, this icon
disappears. Three flashing zeros (
) are displayed.
2.9
Duration of the set programme
After you set a programme, the duration is displayed in hours and minutes (for example
). The duration is calculated automatically on the basis of the maximum load for each
type of fabric. After the programme has started, the time remaining is updated every minute.
End of programme
When the programme has finished three flashing zeros (
) are displayed. The icon 2.8
disappears and the door can be opened.
Incorrect option selection
If you set an option which is not compatible with the set wash programme, the message Err
is displayed for a few seconds. The integrated red light of button 8 flashes.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example
(see paragraph «What to do if...»).
Delay Time value
2.10
Soil degree icons (see paragraph «Select Time Manager option»).
Intensive
Normal
Daily
Light
Quick
Super Quick
Refresh
Super Refresh
2.11
Clock icon
After the programme has started, the duration is displayed and the clock icon is ani-
mated.
2.12
Washing programme phase icons.
When you set the a wash programme, the programme phase icons corresponding to the
various phases making up the programme are shown. After you have pressed button 8 only
the icon of the running phase stays on.
Prewash (this icon lights on when the relevant option button is selected as well)
Wash
Rinses (this icon lights on during the Steam phase as well)
Drain
Spin
electrolux 7