User manual

No spin
This option eliminates all the spin phases and increases the number of rinses for some
programmes.
Rinse Hold
The water of the last rinse is not emptied out to prevent the fabrics from creasing.
When the programme has finished the display shows flashing
. The icon 2.8
remains still visualized. The light of button 8 is off. The door is locked. The water must
be emptied out. To empty out the water, please read the paragraph «At the end of the
programme».
Night Cycle
The machine will not drain the water of the last rinse, so as not to wrinkle the laundry.
As all spinning phases are suppressed, this washing cycle is very noiseless. It can be
set at night or in times with a more economical power rate. On some programmes the
rinses will be performed with more water.
When the programme has finished, the display shows three flashing zero (
).
The icon 2.8 remains still visualized, the light of button 8 is off. The door is locked. The
water must be emptied out. To empty out the water, please read the paragraph «At
the end of the programme».
2.5
Option icons (depending on the model)
Extra Rinse option
Easy iron option
2.6
Delay icon
The delay set appears on the display for a few seconds, then the duration of the previ-
ously set programme is displayed. The relevant icon is lighted on. The delay time value
decreases by one unit every hour and then, when 1 hour remains, the time decreases
every minute.
2.7
Child safety lock (see «Personalisation» chapter).
2.8
Door locked icon
After you have pressed button 8 and the machine has started, this icon is lighted on
and only the phase running icon stays on. When the programme has finished, this icon
disappears. Three flashing zeros (
) are displayed.
2.9
Duration of the set programme
After you set a programme, the duration is displayed in hours and minutes (for example
). The duration is calculated automatically on the basis of the maximum load for each
type of fabric. After the programme has started, the time remaining is updated every minute.
End of programme
When the programme has finished three flashing zeros (
) are displayed. The icon 2.8
disappears and the door can be opened.
Incorrect option selection
If you set an option which is not compatible with the set wash programme, the message Err
is displayed for a few seconds. The integrated red light of button 8 flashes.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example
(see paragraph «What to do if...»).
Delay Time value
2.10
Soil degree icons (see paragraph «Select Time Manager option»).
Intensive
Normal
electrolux 7