User manual

ENGLISH
19
• Spinning starts late or the laundry
is not spun enough:
Problem Possible cause
• The electronic unbalance detection device has cut
in because the laundry is not evenly distributed in
the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several
times before the unbalance disappears and normal
spinning can resume. If, after few minutes, the
laundry is still not evenly distributed in the drum,
the machine will not spin. If at the end of the
programme the laundry is not spun enough,
redistribute the load manually and select the spin
programme.
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning, make
a note of the model, serial number and purchase
date of your machine: the Service Centre will require
this information.
Water is not
visible in the machine. The machine,
which is the result of modern technology, runs
in a very economical way with low water
consumption. Performance is
nevertheless excellent
The machine makes an unusual
noise. The machine is fitted with
a commutator motor which improves
machineperformance.
Model No:................
Product No: ........................
Serial No: ........................
UserManualNukeEUFinal.OK.qxd 04/07/2005 12:53 Pagina 19