User manual

ENGLISH
7 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on.
/
: when this light comes on this means
that the machine is performing the washing
phase. If you have selected the “Prewash
function, this light will be on during the prewash
phase too.
= rinses
= spin
= drain
= end of programme
At the end of the programme the pilot light
illuminates.
The pilot light flashes in the event of operating
problems:
- 4 flashes = the door has not been closed
- 2 flashes = the machine does not empty
- 1 flash = the machine does not fill
To eliminate the problem, see paragraph “Something
not working”.
8 Spin speed selector dial
This dial allows you to reduce the final and the
intermediate spin speeds or to select the NO SPIN
or RINSE HOLD (anti-crease) option.
Model EWF 830
The speeds on the dial refer to programmes for
cotton, synthetics, delicates, wool and handwash.
Position 850 corresponds to 700 r.p.m. for delicates.
Position 500 corresponds to 450 r.p.m. for delicates.
Model EWF 630
The speeds on the dial refer to programmes for all
type of fabrics.
NO SPIN : by selecting this option all the
spinning phases are suppressed. To be used for
extremely delicate items.
The machine will add 3 rinses on cotton
programmes and 1 rinse on synthetic
programme.
RINSE HOLD (anti-crease) : by selecting this
option the water of the last rinse is not emptied
out to prevent the fabrics from creasing. When
the programme has finished the phase light END
is on and the door is blocked to indicate that the
water must be emptied out.
To do this:
turn the programme selector dial to “O
select the drain or spin programme.
Using the spin speed selector dial you can
choose the desired spin. If the dial remains on
position
or
the machine will perform the
spin speed at 400 rpm.
depress START button.
9 Programme selector dial
The selector is divided into 5 sections:
Cotton
Synthetic
Delicate and handwash
Wool
Special programmes
O Reset programme/OFF
The selector dial can be turned either clockwise or
anticlockwise.
Position 60E corresponds to the ENERGY SAVING
programme and position to “cold wash”.
3
0
O
9
5
6
0
E
6
0
4
0
6
0
4
0
3
0
4
0
4
0
11
132990710 GB.qxd 02/03/2004 11:42 Pagina 11 (Nero/Process Black pellicola)