User manual

ENGLISH
15
4. Select the required programme
Turn the programme selector dial to the required
programme. The light of the START/PAUSE button
starts to flash .
The lights corresponding to the different phases
making up the selected programme light on.
5. Select the required options
The light corresponding to the depressed button
illuminates.
6. Select the spin speed or option
or
Turn the spin speed selector to the required speed or
option or : the corresponding light comes on.
EWF 830 EWF 630
6
5
0
5
5
0
5
0
0
4
5
0
8
5
0
7
0
0
6
0
0
5
0
0
3
0
O
9
5
6
0
E
6
0
4
0
6
0
4
0
3
0
4
0
4
0
Operating sequence
Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
of the detergent drawer in order to activate the
ECO valve. Then run the cotton cycle 60°E, with the
machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment .
If you wish to carry out a programme with prewash,
pour detergent into the appropriate compartment
marked .
3. Measure out the additives
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
C0065
C0064
P0004
132990710 GB.qxd 02/03/2004 11:42 Pagina 15 (Nero/Process Black pellicola)