User manual

30 www.electrolux.com
7.
Pull up the appliance in vertical
position.
8.
9.
10.
Pull out the plastic spacers.
Remove the power supply cable and
the drain and inlet hoses from the
hose holders (A) on the rear of the
appliance.
Remove the three bolts.
A
11.
Put the plastic caps in the holes.
You can find these caps in the user
manual bag.
1
2
3
Use a spirit level on the top and
side of the washing machine to
check the levels.
It is important that your
washing machine stands firm
and level on the floor to ensure
correct operation.
11.2 Positioning
The appliance must not be installed
behind a lockable door, a sliding
door or a door with a hinge on the
opposite side so that the washing
machine door is restricted.
IMPORTANT