EWM 1044SEU EN WASHING MACHINE USER MANUAL
www.electrolux.com CONTENTS 1. SAFETY INFORMATION............................................................................................ 3 2. SAFETY INSTRUCTIONS.......................................................................................... 4 3. PRODUCT DESCRIPTION.........................................................................................5 4. CONTROL PANEL.....................................................................................................6 5.
1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.electrolux.com • • • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Do not use water spray and steam to clean the appliance. Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. 2. SAFETY INSTRUCTIONS 2.1 Installation • Remove all the packaging and the transit bolts. • Keep the transit bolts.
2.5 Disposal • Obey the safety instructions on the detergent packaging. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. • Make sure that you remove all metal objects from the laundry. • Do not put a container to collect possible water leakage under the appliance. Contact the Authorised Service Centre to ensure which accessories can be used. • Do not touch the glass of the door while a programme operates. The glass can be hot.
www.electrolux.com 4. CONTROL PANEL 4.1 Control panel description 1 Быстро 2 3 4 5 6 Хлопок 90° Освежить Температура Синтетика Шторы 60° 30° 20° 1000 800 40° Предварит. Отсрочка старта стирка 7 600 Тонкие ткани Джинсы Отжим Легкая Глажка 400 Доп.
• : the rinses phase • : the spin phase 5. PROGRAMME CHART Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) Washing programmes Хлопок 90°C - Cold Хлопок Eco1) 4 kg 1000 rpm White cotton and coloured cotton. Normal soil and light soil. 4 kg 1000 rpm White cotton and colour-fast cotton. Normal soil. The energy consumption decreases and the time of the washing programme is extended.
www.electrolux.com Programme Temperature range Джинсы 60°C - Cold Шторы 40°C - Cold Освежить 30°C Быстро 30°C Maximum load Maximum spin speed Programme description (Type of load and soil level) 4 kg 1000 rpm Items in denim and jersey. Also for dark coloured items. 1 kg 800 rpm Special programme for curtains. The prewash phase is activated automatically. 3) 2 kg 800 rpm Synthetic and delicate items. Light soil items or items to refresh. 1 kg 800 rpm Synthetic and mixed fabric items.
Programme ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 6. CONSUMPTION VALUES The data of this table are approximate. Different causes can change the data: the quantity and type of laundry, the water and ambient temperature. At programme start the display shows the duration programme for the maximum load capacity. During the washing phase the programme duration is automatically calculated and can be greatly reduced if the laundry load is lower than the maximum load capacity (e.g.
www.electrolux.com 7. OPTIONS 7.1 Температура 7.4 Oтсрочка старта Set this option to change the default temperature. With this option you can delay the start of a programme from 30 minutes to 20 hours. Indicator = cold water. The indicator of the set temperature comes on. 7.2 Spin With this option you can change the default spin speed. The display shows the related indicator. 7.5 Доп. полоскание With this option you can add some rinses to a washing programme.
indicator 1) 2) ■2) ■2) ■2) ■2) ■2) ■2) 4) 1) If available. 2) Defaullt duration for all programmes. 3) Shortest: to freshen the laundry. 4) Longest: Increasing the programme duration gradually decreases the energy consumption. The optimized heating phase saves energy and the longer duration maintains the same washing results (specially for normal soil). 8. SETTINGS • To activate/deactivate this option press 8.
www.electrolux.com 2. Put the laundry in the drum, one item at a time. 3. Shake the items before you put them in the appliance. Make sure not to put too much laundry in the drum. 4. Close the door. Make sure that no laundry stays between the seal and the door. There is a risk of water leakage or damage to the laundry. 10.2 Using detergent and additives 1. Measure out the detergent and the fabric conditioner. 2. Carefully close the detergent drawer 1 2 CAUTION 10.
B 3. 4. • Position A for powder detergent (factory setting). • Position B for liquid detergent. When you use the liquid detergent: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid then the maximum level. • Do not set the prewash phase. • Do not set the delay start. 10.5 Setting a programme 1. Turn the programme knob and set the programme: flashes.
www.electrolux.com You can cancel or change the set of the delay start 3. Open the door. 4. Close the door. before you press the cancel the delay start: 5. Press again. The delay start continues to operate. . To • Press to set the appliance to pause. • Press shows until the display '. again to start • Press the programme immediately. 10.8 Interrupting a programme and changing the options 10.
To drain the water: 10.13 Stand-by 1. If necessary, decrease the spin speed. Some minutes after the end of the washing programme, if you do not deactivate the appliance, the energy saving status activates. If you set drains. , the appliance only . The appliance drains the 2. Press water and spins. 3. When the programme is completed and the door lock indicator goes off, you can open the door. 4. Turn the programme knob to position to deactivate the appliance.
www.electrolux.com • Obey the instructions that you find on the on packaging of these products. • Use the correct products for the type and colour of the fabric, the programme temperature and the level of soil. • If your appliance has not the detergent dispenser with the flap device, add the liquid detergents with a dosing ball (supplied by the detergent's manufacturer). 11.4 Ecological hints • Set a programme without the prewash phase to wash laundry with normal soil.
12.5 Cleaning the detergent dispenser 1. 2. 3. 4. 5. 6.
www.electrolux.com 12.6 Cleaning the inlet hose and the valve filter 1. 2. 3. 4. 12.7 Cleaning the drain filter WARNING! Do not clean the drain filter if the water in the appliance is hot. 1. 2.
3. 4. 5. 6. 1 2 7. 8. 9. 10.
www.electrolux.com 12.8 Emergency drain Because of a malfunction, the appliance cannot drain the water. If this occurs, do steps (1) through (9) of 'Cleaning the drain filter'. If necessary, clean the pump. When you drain the water with the emergency drain procedure, you must activate again the drain system: 1. When you drain the water with the emergency drain procedure, you must activate again the drain system: Put 2 litres of water in the main wash compartment of the detergent dispenser. 2.
Problem Possible solution If the delay start is set, cancel the setting or wait for the end of countdown. Deactivate the Child Lock function if it is on. The appliance does not fill with water properly. Make sure that the water tap is open. Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter of the inlet hose and the filter of the valve are not clogged.
www.electrolux.com Problem Possible solution Make sure you use the correct detergent and the correct quantity of it. You cannot open the appliance door. Make sure that the washing programme is finished. Set the drain or the spin programme if there is water in the drum. The appliance makes an Make sure the levelling of the appliance is correct. Refer to unusual noise. 'Installation'. Make sure that the packaging and/or the transit bolts are removed. Refer to 'Installation'.
Level of protection against ingress of solid particles and moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture IPX4 Water supply pressure 0,5 bar (0,05 MPa) 8 bar (0,8 MPa) Minimum Maximum Water supply 1) Cold water Maximum Load Cotton 4 kg Spin Speed Maximum 1000 rpm 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 15. ENVIRONMENTAL CONCERNS Recycle the materials with the symbol .
155248400-A-492013 www.electrolux.
