User manual

3.
B
4.
• Position A for powder detergent (factory setting).
•
Position B for liquid detergent.
When you use the liquid detergent:
•
Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
• Do not set the prewash phase.
• Do not set the delay start.
10.5 Setting a programme
1. Turn the programme knob and set the
programme:
•
The indicator
flashes.
•
The display shows the level of the Time
Manager, the programme duration and
the indicators of the phases of the
programme.
2. If necessary, change the temperature
and the spin speed or add available
options. When you activate an option,
the indicator of the set option comes
on.
If you set something
incorrect, the display shows
the message .
10.6 Starting a programme
without the delay start
Press the .
• The indicator of the stops to flash
and stays on.
• The indicator starts to flash on the
display.
• The programme starts, the door locks,
the display shows the indicator .
• The drain pump can operate for a short
time when the appliance fills water.
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the
programme duration
agree with the laundry
load.
• The display shows the
new value.
10.7 Starting a programme with
the delay start
1. Press
again and again until the
display shows the delay you want to
set.
The related indicator comes on the
display.
2. Press :
• The appliance starts the countdown.
• When the countdown is completed, the
programme starts automatically.
13