EWM 1046 CDU EN Washing Machine User Manual
www.electrolux.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 3 1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.electrolux.com • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. • The operating water pressure (minimum and maximum) must be between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa) • The ventilation openings in the base (if applicable) must not be obstructed by a carpet. • The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused. 2.
ENGLISH hose-sets. Old hose sets must not be reused. • Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean. • The first time you use the appliance, make sure that there is no leakage. 2.2 Use WARNING! Risk of injury, electrical shock, fire, burns or damage to the appliance. • Use this appliance in a household environment. • Do not change the specification of this appliance. • Obey the safety instructions on the detergent packaging.
www.electrolux.com 4. CONTROL PANEL 1 2 3 4 5 6 Предв. стирка Температура Отсрочка старта Доп. Легкая глажка полоскание Отжим TimeManager Старт/Пауза 11 1 On Off button 10 7 Delay start touchpad (Отсрочка старта) (BKЛ/ВЫКЛ) 2 Programme knob 3 Spin reduction touchpad (Отжим) 8 Extra rinse touchpad (Доп. полоскание) 9 Easy iron touchpad (Легкая глажка) 4 Temperature touchpad (Температура) 5 Display 6 Prewash touchpad (Предв.
ENGLISH D) : the child safety lock indicator. F) The spin area: E) Washing indicators: – : the Spin speed indicator – : the washing phase – : the No Spin indicator – : the rinses phase – : the Rinse Hold indicator – : the spin phase – : Extra rinse permanent option. 7 – G) : the Extra Silent indicator. : the Door locked indicator 5.
www.electrolux.com Programme Temperature range Type of load and soil Maximum load, Maximum spin Одеяла 60° C - 30° C Special programme for one synthetic blanket, duvet, bedspread and so on. 2 kg, 800 rpm Освежить 30 °C Synthetic and delicate items. Light soil or items to refresh. 2 kg, 800 rpm Быстро 30 °C Synthetic and mixed fabric items. Light soil and items to freshen up.
ENGLISH 9 6. CONSUMPTION VALUES The data of this table are approximate. Different causes can change the energy and water consumption data and the programme duration. These causes are the quantity and the type of laundry, the water and the ambient temperature. At programme start the display shows the duration programme for the maximum load capacity.
www.electrolux.com Additional spin options: 7.5 Extra Rinse No Spin • Set this option to remove all spin phases. • Set it for very delicate fabrics. • The rinse phase uses more water for some washing programmes. • The display shows the indicator . With this option you can add some rinses to a washing programme. Use this option for persons allergic to detergents and in areas where the water is soft. The related indicator comes on. Rinse Hold • Set this option to prevent the laundry creases.
ENGLISH phase saves energy and the longer duration maintains the same washing results (specially for normal soil). 11 • To activate/deactivate this option and at the same time until press the indicator comes on/goes off. 7.8 Child Lock 7.10 Acoustic signals With this option you can prevent that the children play with the control panel. • To activate/deactivate the option, and at the same time press until the indicator comes on/goes off.
www.electrolux.com 9.1 Loading the laundry 1. 2. 3. Open the appliance door. Put the laundry in the drum, one item at a time. Shake the items before you put them in the appliance. Make sure not to put too much laundry in the drum. Close the door. CAUTION! Make sure that no laundry stays between the seal and the door. There is a risk of water leakage or damage to the laundry. 9.2 Using detergent and additives 2 1 • Measure out the detergent and the fabric conditioner.
ENGLISH 3. 13 4. B • Position A for powder detergent (factory setting). • Position B for liquid detergent. When you use the liquid detergent: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid then the maximum level. – Do not set the prewash phase. – Do not set the delay start. 9.3 Setting a programme 1. 2. Turn the programme knob and set the programme: – The related programme indicator comes on. flashes.
www.electrolux.com Press again to start the programme immediately. 9.6 Interrupting a programme and changing the options You can change only some options before they operate. 1. Press . The indicator flashes. 2. Change the options. 3. Press again. The programme continues. 9.7 Cancelling a programme 1. 2. Press the button for some seconds to cancel the programme and to deactivate the appliance. Press the same button again to activate the appliance. Now, you can set a new washing programme.
ENGLISH • After 5 minutes from the end of the washing programme Press the button pliance again. to activate the ap- 15 The display shows the end of the last set programme. Turn the programme knob to set a new cycle. 10. HELPFUL HINTS AND TIPS 10.1 The laundry load 10.3 Detergents and additives • Divide the laundry in: white, coloured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash together white and coloured items.
www.electrolux.com areas where the water hardness is soft it is not necessary to use a water softener. To know the water hardness in your area, contact your local water authority. Use the correct quantity of the water softener. Obey the instructions that you find on the packaging of the product. 11. CARE AND CLEANING WARNING! Before maintenance, disconnect the appliance from the mains supply. 11.1 External cleaning Clean the appliance only with soap and warm water. Fully dry all the surfaces. 11.
ENGLISH 3. 4. 5. 6. 11.5 Cleaning the valve filter 1. 2.
www.electrolux.com 3. 4. 11.6 Cleaning the drain filter WARNING! Do not clean the drain filter if the water in the appliance is hot. 1. 2. 3. 4.
ENGLISH 5. 19 6. 1 2 7. 8. 9. 10. 2 1 11.7 Emergency drain 11.8 Frost precautions Because of a malfunction, the appliance cannot drain the water. If this occurs, do steps (1) through (10) of 'Cleaning the drain filter'. If necessary, clean the pump. When you drain the water with the emergency drain procedure, you must activate again the drain system: 1. Put 2 litres of water in the main wash compartment of the detergent dispenser. 2. Start the programme to drain the water.
www.electrolux.com 5. 6. Empty the drain pump. Refer to the emergency drain procedure. When the drain pump is empty, install the inlet hose again. WARNING! Make sure that the temperature is more than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. 12. TROUBLESHOOTING The start of the appliance does not occur or it stops during operation. First try to find a solution to the problem (refer to the table).
ENGLISH Problem 21 Possible solution Make sure that the drain hose has no kinks or bends. Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to 'Care and cleaning'. Make sure that the connection of the drain hose is correct. Set the drain programme if you set a programme without drain phase. Set the drain programme if you set an option which ends with water in the tub. The spin phase does not operate or the washing cycle lasts longer than usually.
www.electrolux.com Problem Possible solution The washing results are not satisfactory. Increase the detergent quantity or use a different detergent. Use special products to remove the stubborn stains before you wash the laundry. Make sure that you set the correct temperature. Decrease the laundry load. After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Service. If the display shows other alarm codes.
ENGLISH 23
155248391-A-512015 www.electrolux.