User manual

6. CONSUMPTION VALUES
The data of this table are approximate. Different causes can change the ener-
gy and water consumption data and the programme duration. These causes
are the quantity and the type of laundry, the water and the ambient tempera-
ture.
At programme start the display shows the duration programme for the maxi-
mum load capacity.
During the washing phase the programme duration is automatically calculated
and can greatly be reduced if the laundry load is lower than the maximum load
capacity (e.g. Cotton 60°C, maximum load capacity 4 kg, the programme du-
ration exceeds 2 hours; real load 1 kg, the programme duration don’t reach 1
hour).
When the appliance is calculating the real programme duration a dot blinks in
the display.
Programmes Load
(Kg)
Energy
consump-
tion
(kWh)
Water con-
sumption
(litre)
Programme
duration
(minutes)
Хлопок 60 °C 4 0.59 34
For the dura-
tion
of the pro-
grammes,
please refer
to the display
on the control
panel.
Хлопок Eco 60 °C
1)
4 0.66 46
Хлопок 40 °C 4 0.55 38
Синтетика 40 °C 2 0.39 41
Тонкие ткани 40 °C 2 0.45 51
Шерсть/Ручная
стирка 30 °C
1.5 0.40 61
1)
«Cotton Energy Saving programme» at 60° C with a load of 4 kg is the reference
programme for the data entered in the energy label, in compliance with EEC 92/75
standards.
Off Mode (W) Left On Mode (W)
0.48 0.48
The information given in the chart above are in compliance with the EU Commis-
sion regulation 1015/2010 implementing directive 2009/125/EC.
7. OPTIONS
7.1 Temperature
Set this option to change the default tem-
perature.
Indicator
= cold water.
The indicator of the set temperature
comes on.
7.2 Spin
With this option you can decrease the de-
fault spin speed.
The display shows the indicator of the set
speed.
ENGLISH 9