User manual

10.12 At the end of the
programme
•
The appliance stops automatically.
• The acoustic signal operates (if it is
activated).
• In the display
comes on.
•
The indicator of the
goes off.
•
The door lock indicator
goes off.
•
You can open the door.
• Remove the laundry from the
appliance. Make sure that the drum is
empty.
• Close the water tap.
• Turn the programme knob to position
to deactivate the appliance.
•
Keep the door ajar, to prevent the
mildew and odours.
The washing programme is
completed, but there is water in the
drum:
• The drum turns regularly to prevent the
creases in the laundry.
• The door lock indicator
is on. The
indicator flashes. The door stays
locked.
•
You must drain the water to open the
door.
To drain the water:
1. If necessary, decrease the spin speed.
If you set
, the appliance only
drains.
2. Press . The appliance drains the
water and spins.
3. When the programme is completed
and the door lock indicator goes
off, you can open the door.
4. Turn the programme knob to position
to deactivate the appliance.
The appliance drains and
spins automatically after
approximately 18 hours
(except for Wool programme).
10.13 Stand-by
Some minutes after the end of the
washing programme, if you do not
deactivate the appliance, the energy
saving status activates.
The energy saving status decreases the
energy consumption when the appliance
is on the stand by.
•
All indicators and the display go off.
• The indicator of the
flashes slowly
•
Press one of the options to deactivate
the energy saving status.
11. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
11.1 The laundry load
• Divide the laundry in: white, coloured,
synthetics, delicates and wool.
• Obey the washing instructions that are
on the laundry care labels.
•
Do not wash together white and
coloured items.
• Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first times.
ENGLISH
15