Service manual

- 37 -
DGS-TDS-N 12.06 R.B. © Electrolux 599 52 74 52 EN
214563
Service Program
Fault indication by multifunctionsdisplay LCD
- Switch off the appliance.
- Hold buttons 6 and 5 pressed simultaneously and turn the program selector one position to
the right.
- Hold the two selected buttons pressed until possibly a buzzer will sound and/or the LCD will
give a light.
- By the program selector it is possible to interrogate the desired checking function according
to the table.
Position of the
rotary switch
Button Test function
Off Off
21 - 15
Positions
01 Button 6 1) Start of the customer service testprogram
and 2) LCD - Test
Button 5 LEDs are step by step illuminated.
If you press a button the according LED is on.
02 Water channel mainwash
Water intake up to savety level fS
Time max. 5 min
Valve mainwash
Display indicates current water level in mm
03 Water channel prewash
Water intake up to savety level fS
Time max. 5 min
Valve prewash
Display indicates current water level in mm
04 Water channel softener
Water intake up to savety level fS
Time max. 5 min
Valve mainwash and prewash
Display indicates current water level in mm
05 Water channel spots
Water intake up to savety level fS
Time max. 5 min
Valve spots or hotwater
Display indicates current water level in mm
06 Heating and circulation pump
Heating up to 90°C
Time max. 10 min
Water intake over mainwash chamber
Display indicates current temperature in °C
07 Tub leakage test
Water intake over mainwash chamber up to 1. Niv.
Motor rotation 250 1/min
Display indicates current speed in 1/min
08 Draining and spinning
Draining
Spinning up to maximium spin speed,
if level < fSch
Display indicates current speed in 1/min
09 DSP
The drum is positioned if level < fSch
10 Displaying the error code (programme display)