User manual

Cancelling the Delay Start after having started the pro-
gramme:
Set the appliance to PAUSE by pressing button 8.
Press button 6 once. On the display will appear
'.
Press button 8 again to start the programme.
The selected delay can be changed only after se-
lecting the washing programme again.
The door will be locked throughout the delay time.
If you need to open the door, you must first set
the appliance to PAUSE by pressing button 8 and
wait a few minutes before opening the door. After
you have closed the door, press the same button
again.
The Delay Start cannot be selected with the drain-
ing programme.
.
7.1
7.2
7.3
Indicator pilot lights
When you start the programme by pressing the button
8, the washing phase pilot light (7.1) illuminates. This
means that the appliance is operating.
The additional rinses pilot light (7.2) illuminates when
the appliance performs an extra rinse.
When the programme has finished the end cycle pilot
light (7.3) comes on.
8
Start/Pause Start the programme by pressing the button 8
To start the selected programme, press the button 8,
the corresponding green pilot light stops flashing. The
pilot light 7.1 illuminates to indicate that the appliance
starts operating and the door is locked. If you have
chosen a delayed start, the appliance will begin the
countdown.
To interrupt a programme which is running, press the
button 8: the corresponding green pilot light starts
flashing. It is possible to change some options of a
running programme before the programme carries
them out.
To restart the programme from the point at which it
was interrupted, press the button 8.
After the programme has started the door is locked. If,
for any reason, you need to open the door, set firstly
the appliance to PAUSE by pressing the button 8. Af-
ter a few minutes it will be possible to open the door.
If the door remains locked, this means that the appliance
is already heating or that the water level is too high. In
any case, do not try to force the door!
If you cannot open the door but you need to open it you
have to switch the appliance off by turning the selector
dial to
. After a few minutes the door can be opened
(pay attention to the water level and temperature!).
After closing the door, it is necessary to select the pro-
gramme and options again and to press the button 8.
18 electrolux
Downloaded From WashingMachine-Manual.com Manuals