EWP 1074 TDW EWP 1274 TDW ................................................ .............................................
www.electrolux.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 3 1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.electrolux.com • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. • The operating water pressure (minimum and maximum) must be between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa) • The ventilation openings in the base (if applicable) must not be obstructed by a carpet. • The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused. 2.
ENGLISH • This appliance complies with the E.E.C. Directives. 5 • Make sure that you remove all metal objects from the laundry. • Do not put a container to collect possible water leakage under the appliance. Contact the Service to ensure which accessories can be used. Water connection • Make sure not to cause damage to the water hoses. • The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused.
www.electrolux.com 3. PRODUCT DESCRIPTION 1 2 1 Worktop 3 2 Detergent dispenser 3 Control panel 4 Door handle 5 Rating plate 6 Feet for the appliance level 4 5 6 3.1 Child safety device When you activate this device, you cannot close the door. This prevents children or pets to be closed in the drum. To activate the device, turn it clockwise, until the groove is horizontal. To deactivate the device, turn it counter-clockwise, until the groove is vertical.
ENGLISH 1 Programme knob 6 Delay start touchpad 2 Spin reduction touchpad 7 Extra rinse touchpad 3 Temperature touchpad 8 Easy iron touchpad 4 Display 9 Start pause touchpad 5 Prewash touchpad 10 Time Manager touchpads 4.1 Display A B C B) C) D) E D A) The time area: E) – Programme time. – The alarm codes. Refer to the chapter “Troubleshooting” for their description. – The level of the Time Manager . The Delay Start indicator. The Child Lock indicator.
www.electrolux.com Programme Temperature range Type of load and soil Maximum load, Maximum spin Silk 30 °C Special programme for silk and mixed synthetic items. 1 kg, 800 rpm Duvet 60 °C – 30 °C Special programme for one synthetic blanket, duvet, bedspread and so on. 2 kg, 800 rpm To rinse and spin the laundry. All fabrics. 7 kg, 1000 rpm (EWP1074TDW), 1200 rpm (EWP1274TDW) Rinse Cold To drain the water in the drum. All fabrics. 7 kg Drain To spin the laundry and to drain the water in the drum.
ENGLISH 9 Programme ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ ∎ 6. CONSUMPTION VALUES The data of this table are approximate. Different causes can change the data: the quantity and type of laundry, the water and ambient temperature.
www.electrolux.com Programmes Delicates 40 °C Wool/Hand wash 30 °C Load (kg) Energy consumption (kWh) Water consumption (litre) Approxi- Remain- Remainmate ing ing promoismoisgramme ture ture duration (%)1) (%)1) (miEWP107 EWP127 nutes) 4TDW 4TDW 3.5 0.65 71 77 37 35 2 0.30 48 55 32 30 Standard cotton programmes Standard 60 °C cotton 7 1.07 50 236 60 53 Standard 60 °C cotton 3.5 0.79 36 192 60 53 Standard 40 °C cotton 3.5 0.
ENGLISH No Spin • Set this option to deactivate all spin phases. Only the drain phase is available. • The related indicator comes on. • Set this option for very delicate fabrics. • The rinses phase uses more water for some washing programmes. Rinse Hold • Set this option to prevent the laundry creases. • The related indicator comes on. • There is a water in the drum when the programme is completed. • The drum turns regularly to prevent the laundry creases. • The door stays locked.
www.electrolux.com If you deactivate the acoustic signals, they continue operate when the appliance has a malfunction. 7.10 Acoustic signals The acoustic signals operate when: • The programme is completed. • The appliance has a malfunction. To deactivate/activate the acoustic sigand at the same time nals, press for 6 seconds. 8. BEFORE FIRST USE 1. 2. Put 2 litre of water in the detergent compartment for washing phase. This activates the drain system.
ENGLISH 13 9.2 Using detergent and additives When you set a programme with a prewash, put the detergent for prewashing phase directly into the drum. • Measure out the detergent and the fabric conditioner. • Carefully close the detergent drawer. Detergent compartment for washing phase. Compartment for liquid additives (fabric conditioner, starch). Flap for powder or liquid detergent. Liquid or powder detergent 1. 2. A 3. 4.
www.electrolux.com • Position A for powder detergent (factory setting). • Position B for liquid detergent. When you use the liquid detergent: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid then the maximum level. – Do not set the prewash phase. – Do not set the delay start. 9.3 Setting a programme 1. 2. Turn the programme knob and set the programme: – The indicator flashes.
ENGLISH CAUTION! If the temperature and level of the water in the drum are too high, you cannot open the door. Open the appliance door when the delay start operates: 1. Press to pause the appliance. 2. 3. 4. Wait until the door lock indicator goes off. You can open the door. Close the door and press again. The delay start continues to operate. Open the appliance door when the programme operates: 1. 2. 3. 4. Turn the programme knob to to deactivate the appliance.
www.electrolux.com • Turn inside out multilayered fabrics, wool and items with painted illustrations. • Remove hard stains. • Wash with a special detergent heavy soil stains. • Be careful with the curtains. Remove the hooks or put the curtains in a washing bag or pillowcase. • Do not wash in the appliance : – Laundry without hems or with cuts – Underwired bras. – Use a washing bag to wash small items. • A very small load can cause balance problems with the spin phase.
ENGLISH Regularly examine the drum to prevent limescale and rust particles. To remove rust particles use only special products for washing machine. Do this separately from the laundry wash. Always obey the instructions that you find on the packaging of the product. 17 the drum. Make regularly a maintenance wash. To do this: • Remove the laundry from the drum. • Set the cotton programme with the highest temperature with a small quantity of detergent. 11.
www.electrolux.com 11.6 Cleaning the drain filter WARNING! Do not clean the drain filter if the water in the appliance is hot. 1. 2. 3. 4. 5. 6.
ENGLISH 19 11.7 Cleaning the inlet hose and the valve filter 1. 2. 1 2 3 3. 4. 20° 11.8 Frost precautions 5. If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. 6. Do this procedure also when you want to do the emergency drain. 1. 2. 3. 4. Disconnect the mains plug from the mains socket. Close the water tap. Remove the water inlet hose.
www.electrolux.com 12. TROUBLESHOOTING The start of the appliance does not occur or it stops during operation. First try to find a solution to the problem (refer to the table). If not, contact the service centre. • - The appliance door is open or not closed correctly. Please check the door! • - The mains supply is unstable. Wait until the mains supply is stable. With some problems, the acoustic signals operate and the display shows an alarm code: • - The appliance does not fill with water.
ENGLISH Problem 21 Possible solution Set the drain programme if you set an option which ends with water in the tub. The spin phase does not operate or the washing cycle lasts longer than usually. Set the spin programme. Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to 'Care and cleaning'. Adjust manually the items in the tub and start the spin phase again. This problem may be caused by balance problems. There is water on the floor.
www.electrolux.com 13.
ENGLISH 23
192977320-A-062013 www.electrolux.
