User manual

7.10 Acoustic signals
The acoustic signals operate when:
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press
and at the same time
for 6 seconds.
If you deactivate the acoustic sig-
nals, they continue operate when
the appliance has a malfunction.
8. BEFORE FIRST USE
1.
Put 2 litre of water in the detergent
compartment for washing phase. This
activates the drain system.
2.
Put a small quantity of detergent in
the compartment for washing phase.
3.
Set and start a programme for cotton
at the highest temperature without
laundry. This removes all possible dirt
from the drum and the tub.
9. DAILY USE
• Open the water tap. • Connect the mains plug to the mains
socket.
9.1 Loading the laundry
1.
Open the appliance door.
2.
Put the laundry in the drum, one item
at a time. Shake the items before you
put them in the appliance. Make sure
not to put too much laundry in the
drum.
3.
Close the door.
CAUTION!
Make sure that no laundry stays
between the seal and the door.
There is a risk of water leakage or
damage to the laundry.
12
www.electrolux.com