User manual

• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
– Do not use gelatinous or thick liquid detergents.
– Do not put more liquid then the maximum level.
– Do not set the prewash phase.
– Do not set the delay start.
9.3 Setting a programme
1.
Turn the programme knob and set
the programme:
–
The indicator
flashes.
– The display shows the level of the
Time Manager, the programme du-
ration and the indicators of the
phases of the programme.
2.
If necessary, change the temperature
and the spin speed or add available
options. When you activate an option,
the indicator of the set option comes
on.
If you set something incorrect, the
display shows the message Err.
9.4 Starting a programme
without delay start
Press :
•The indicator
stops to flash and
stays on.
•
The indicator
starts to flash on the
display.
• The programme starts, the door is
locked and the display shows the indi-
cator
.
• The drain pump can operate for a short
time when the appliance fills water.
After approximately 15 minutes
from the start of the programme:
• The appliance adjusts automati-
cally the programme duration
agree with the laundry load.
• The display shows the new val-
ue.
9.5 Starting a programme with
delay start
•
Press
again and again until the dis-
play shows the delay you want to set.
The related indicator comes on the dis-
play.
• Press
:
– The appliance starts the countdown.
– When the countdown is completed,
the programme starts automatically.
You can cancel or change the set
of the delay start before you press
.
To cancel the delay start:
1.
Press to set the appliance to
pause.
2.
Press until the display shows ’.
Press
again to start the pro-
gramme immediately.
9.6 Interrupting a programme
and changing the options
You can change only some options be-
fore they operate.
1.
Press . The indicator flashes.
2.
Change the options.
3.
Press again. The programme con-
tinues.
9.7 Cancelling a programme
1.
Turn the programme knob to to
cancel the programme and to deacti-
vate the appliance.
2.
Turn the programme knob again to
activate the appliance. Now, you can
set a new washing programme.
The appliance does not drain the
water.
9.8 Opening the door
While a programme or the delay start op-
erates, the appliance door is locked and
the display shows the indicator
.
14
www.electrolux.com