User manual

7. OPTIONS
7.1 Temperature
Set this option to change the default tem-
perature.
Indicator
= cold water.
The display shows the set temperature.
7.2 Spin
With this option you can change the de-
fault spin speed.
The indicator of the set speed comes on.
Additional spin options:
No Spin
Set this option to deactivate all spin
phases. Only the drain phase is availa-
ble.
The related indicator comes on.
Set this option for very delicate fabrics.
The rinses phase uses more water for
some washing programmes.
Rinse Hold
Set this option to prevent the laundry
creases.
The related indicator comes on.
There is a water in the drum when the
programme is completed.
The drum turns regularly to prevent the
laundry creases.
The door stays locked.
You must drain the water to unlock the
door.
To drain the water refer to ‘At the
end of the programme’.
7.3 Prewash
With this option you can add a prewash
phase to a washing programme.
Use this option for heavy soil.
When you set this option the programme
duration increases.
The related indicator comes on.
7.4 Delay Start
With this option you can delay the start of
a programme from 30 minutes to 20
hours.
The display shows the related indicator.
7.5 Extra Rinse
With this option you can add some rinses
to a washing programme.
Use this option for persons allergic to de-
tergents and in areas where the water is
soft.
The related indicator comes on.
7.6 Easy Iron
The appliances carefully washes and
spins the laundry to prevent the creases.
The appliance decreases the spin speed,
uses more water and adapt the pro-
gramme duration to the type of laundry.
The related indicator comes on.
7.7 Time Manager
When you set a washing programme, the
display shows the default duration.
Press
or to decrease or increase the
programme duration.
The Time Manager is available only with
the programmes in the table.
Time Manager compatibility
indicator
Eco
1)
2)
3)
3)
3)
3)
3)
3)
1)
Shortest: to freshen the laundry.
2)
Longest: Increasing the programme
duration gradually decreases the energy
consumption. The optimized heating
phase saves energy and the longer
duration maintains the same washing
results (specially for normal soil).
3)
Default level.
ENGLISH 9