User manual

Pro-
grammes
Load
(Kg)
Energy
consump-
tion (kWh)
Water con-
sumption
(litre)
Approxi-
mate pro-
gramme
duration
(minutes)
Remain-
ing mois-
ture (%)
1)
Cottons 40
°C
6 0.75 56 145 60
Synthetics 40
°C
3 0.47 45 127 37
Delicates 40
°C
3 0.65 62 100 37
Wool 30 °C 2 0.25 55 56 32
Standard cotton programmes
Standard 60
°C cotton
6 0.76 49 169 60
Standard 60
°C cotton
3 0.66 40 154 60
Standard 40
°C cotton
3 0.51 40 133 60
Off Mode (W) Left On Mode (W)
0.75 0.75
The information given in the chart above are in compliance with the EU Commis-
sion regulation 1015/2010 implementing directive 2009/125/EC.
1)
At the end of spin phase.
7. OPTIONS
7.1 Temperature
Set this option to change the default tem-
perature.
Indicator
= cold water.
The display shows the set temperature.
7.2 Spin
With this option you can change the de-
fault spin speed.
The indicator of the set speed comes on.
Additional spin options:
No Spin
• Set this option to deactivate all spin
phases. Only the drain phase is availa-
ble.
• The related indicator comes on.
• Set this option for very delicate fabrics.
• The rinses phase uses more water for
some washing programmes.
Rinse Hold
• Set this option to prevent the laundry
creases.
• The related indicator comes on.
• There is a water in the drum when the
programme is completed.
• The drum turns regularly to prevent the
laundry creases.
• The door stays locked.
• You must drain the water to unlock the
door.
To drain the water refer to ‘At the
end of the programme’.
ENGLISH 9