User manual

10.6 Starting a programme
without the delay start
Press the .
•
The indicator of the
stops to
flash and stays on.
•
The programme starts, the door
locks, the indicator
is on.
•
The drain pump can operate for a
short time at the beginning of the
washing cycle.
10.7 Starting a programme with
the delay start
1. Press
to set the delay you want to
set.
The indicator of the set delay is on. The
indicator is on.
2. Press :
•
The appliance starts the
countdown.
• When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you press the .
To cancel the delay start :
a. Press
to set the appliance to
pause
b. Press until the indicator of the
set delay goes off.
Press again to start the
programme immediately.
10.8 Interrupting a programme
and changing the options
You can change only some options before
they operate.
1. Press .
The indicator flashes.
2. Change the options.
3. Press again.
The programme continues.
10.9 Cancelling a running
programme
1. Turn the programme knob to position
to cancel the programme and to
deactivate the appliance.
2. Turn the programme knob again to
activate the appliance. Now, you can
set a new washing programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.10 Opening the door when
the delay start operates
While a delay start operates, the appliance
door is locked and the indicator is on.
1. Press the to pause the appliance.
2. Wait until the door lock indicator
goes off.
3. You can open the door.
4. Close the door and press the
again.
The delay start continues to operate.
10.11 Opening the door when
the programme operates
While a programme operates, the
appliance door is locked and the indicator
is on.
CAUTION!
If the temperature and level of
the water in the drum are too
high, you cannot open the
door.
1. Turn the programme knob to position
to deactivate the appliance.
2. Wait for some minutes and then open
the appliance door.
3. Close the appliance door.
4. Set the programme again.
ENGLISH
13