User manual

Programmes Load
(kg)
Energy
consump-
tion (kWh)
Water con-
sumption
(litre)
Approxi-
mate pro-
gramme
duration
(minutes)
Remaining
moisture
(%)
1)
Standard 60 °C
cotton
3.5 0.69 36 186 53
Standard 40 °C
cotton
3.5 0.54 37 175 53
1)
At the end of spin phase.
Off Mode (W) Left On Mode (W)
0,48 0,48
The information given in the chart above are in compliance with the EU Commission
regulation 1015/2010 implementing directive 2009/125/EC.
7. OPTIONS
7.1 Temperatura
Set this option to change the default
temperature.
Indicator = cold water.
The indicator of the set temperature
comes on.
7.2 Wirowanie
With this option you can change the
default spin speed.
The indicator of the set speed comes on.
Additional spin options:
No Spin
Set this option to deactivate all spin
phases. Only the drain phase is
available.
The related indicator comes on.
Set this option for very delicate fabrics.
The rinses phase uses more water for
some washing programmes.
Rinse Hold
Set this option to prevent the laundry
creases.
The related indicator comes on.
There is a water in the drum when the
programme is completed.
The drum turns regularly to prevent the
laundry creases.
The door stays locked. You must drain
the water to unlock the door.
To drain the water refer to ‘At
the end of the programme’.
7.3 Pranie wstępne
With this option you can add a prewash
phase to a washing programme.
Use this option for heavy soil.
When you set this option the programme
duration increases.
The related indicator comes on.
7.4 Opóźnienie Startu
With this option you can delay the start of
a programme from 30 minutes to 20
hours.
The display shows the related indicator.
7.5 Dodatkowe Płukanie
With this option you can add some rinses
to a washing programme.
www.electrolux.com10