User manual

ENGLISH
14 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on. When the programme has
finished, the End pilot light comes on.
The END pilot light flashes in the event of
operating problems.
At the same time an alarm code appears on the
display.
E10 = the machine does not fill
E20 = the machine does not empty
E40 = the door has not been closed
To eliminate the problem, see paragraph “Something
not working”.
If at the end of the programme the pilot light
flashes this means that the drain filter must be
cleaned.
Prewash
Main wash
Rinses
Stop with water in the tub
Drain
Spin
Clogged filter
End
11
132990760 GB.qxd 19/04/2004 11.26 Pagina 11