User manual

The indicator of stops to flash
and stays on.
The indicator starts to flash
on the display.
The programme starts, the door
locks, the display shows the
indicator .
The drain pump can operate for a
short time when the appliance fills
water.
After approximately 15
minutes from the start of the
programme:
The appliance adjusts
automatically the
programme duration
agree with the laundry
load.
The display shows the
new value.
10.8 Starting a programme with
the delay start
1. Press again and again until the
display shows the delay you want to
set.
The related indicator comes on the
display.
2. Press
:
The appliance starts the
countdown.
When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you press the . To
cancel the delay start:
Press to set the
appliance to pause.
Press until the
display shows
'.
Press again to
start the programme
immediately.
10.9 Interrupting a programme
and changing the options
You can change only some options
before they operate.
1. Press
.
The indicator flashes.
2. Change the options.
3. Press again.
The programme continues.
10.10 Cancelling a running
programme
1. Press the button for some
seconds to cancel the programme
and to deactivate the appliance.
2. Press the same button again to
activate the appliance. Now, you can
set a new washing programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.11 Opening the door when
the delay start operates
While the delay start operates, the
appliance door is locked and the display
shows the indicator
.
1. Press
to pause the appliance.
2. Wait until the door lock indicator
goes off.
3. Open the door.
4. Close the door.
5. Press again.
The delay start continues to operate.
10.12 Opening the door when
the programme operates
While the programme operates, the
appliance door is locked and the display
shows the indicator .
ENGLISH 15