User manual

12
110 C200 C 150 C
R113
R111 R113
FP
A
95 C 60 C 40 C 30 C
4095
60
60
30
40
30
40
cI
You can cancel the delay time at any
moment, before you press the Start/Pause button.
If you have already pressed the Start/Pause button,
and you wish to cancel the delay time, proceed as
follows:
Set the washing machine to Pause by pressing the
Start/Pause button;
Press the Delay start button once, the light rel-
evant to the selected delay goes off .
Press the Start/Pause button again to start the
programme.
The selected delay can be changed only after
selecting the washing programme again.
The door will be locked throughout the delay
time (Door locked pilot light lit).
If you need to open the door, you must first
set the washing machine to Pause by press-
ing the Start/Pause button. After you have
closed the door, press the Start/Pause but-
ton again.
For more information see paragraph “Something not
working”?
At the beginning of the programme, only the Execu-
tion light stays on. When the progra-
mme has finished, the End pilot light comes on. The
End light flashes in the event of operating problems :
4 flashes: door open
2 flashes: problem with water draining
1 flash: problem with water supply
8. Spin speed selector dial
9. Programme selector dial
The selector is divided into 6 sections:
Cotton (1-3)
Synthetics (4-6)
Delicate/Silk/Wool/Handwash (7-10)
Cold wash (11)
Refresh programme (12)
Special Programmes:rinses/spin/ drain (13-14-15)
O Reset programme/OFF
The selector dial can be turned either clockwise or
anticlockwise.
At the end of the programme the selector
dial must be turned to position “O” to switch
the machine off.
9
7. Programme dispiay
When you choose the delayed start, the light relevant
to the selected delay lights up. After the machine has
started, the remaining time is shown by the corre-
sponding indicator light.
To select the washing soin speed turn the dial to the
required value.
The delay start can not be selected with “Spin ”
and “Drain” programmes.
Important!
RINSE HOLD position : when you choose this
option, the machine will not drain the water of the last
rinse, so as not to wrinkle the laundry.At the end of the
cycle, the light of the Start/Pause button remains
lit, the door is locked, to indicate that the water must
be drained.
To complete the cycle, choose one of the following
options:
NO SPIN position: by selecting this option all the
spinning phases are suppressed. To be used for ex-
tremely delicate items.
The machine will add rinses on cotton progra-
mmes and synthetic programmes.
Maximum speeds are:
Drain only: set the programme selector dial to
position “Drain”(15), then press the “Start/Pause”
button.
Drain and Spin: set the programme selector dial
to position”Spin”(14), then press the “Start/Pause”
button.
for cotton, synthetic fabrics, wool, and fabrics to be
handwashed: 850rpm;
for delicate fabrics, silk: 650rpm.