User manual

8
1
3
12467 8 953
/
4
5
3
6
12 8 4 2
2
13
Operating sequence.
1. Place the laundry in drum
Open the door.
Place the laundry in drum, one item at a time,shaki-
ng them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out
the amount of detergent recommended by the manu-
facturer in a graduated cup and pour it into the main
wash compartment .
If you wish to carry out the prewash, pour detergent
into the appropriate compartment .
3. Measure out the additives
If required, pour fabric softener into the compartment
marked , without exceeding the
MAX mark.
4. Select the desired programme
Turn the programme selector dial to the desired position.
the light of the Start/Pause button starts to flash.
5. Select required spin speed or
No spin / Rinse hold option
6. Select the desired option(s)
The light corresponding to the depressed button illumi-
nates.
Turn the spin speed selector dial to the desired posit-
ion.
7. Select the Delay Start
Before you start the program, if you wish the start-
ing to be delayed, press the Delay button repeatedly,
or keep it pressed, to select the desired delay. The
selected delayed time value ,The relevant light gose
on.
8. Start the program
Before washing your first load of laundry we recom-
mend that you run a cotton cycle at 60
with the
machine empty, in order to remove any manufacturing
residue from the drum and tub.
Important!
If you accidently select a spin speed higher than the
limit, the machine will perform with the default speed.
(for delicates & silk: 650rpm)
To start the selected program, press the Start/Pause
button; the corresponding light stops flashing.
The Execution light illuminates.
The machine starts operating.