User manual

The machine will go through a series of
maximum six pulse spray and short
spin cycles in this manner, depending
on program selection, followed by a
final long spin that removes the water
from the clothes to complete the full
wash program.
Compare this with Deep rinse where
much more water is used.
Deep rinse, water enters the
machine filling up to the wash water
level selected. The washer agitates
and finally empties the rinse water
through the drain hose.
Extra rinse, this is special option for
those people who suffer from
allergies, this extra rinse will provide
two deep rinses to ensure all
detergent residue has been removed.
Eco Rinse and Fast Rinse CANNOT
be selected with Woollens and
Bedding program.
Select Deep rinse if you are going to
use fabric softener.
Deep rinse ensures the fabric softener
is correctly dispensed and thoroughly
removed from your clothes during
rinsing.
Extra/Eco/Fast rinse is not
designed to be used with fabric
softener.
By pressing ‘Reduce Time’ button, then
press the modify option buttons to
decrease or to back to default
agitation time.
Reduce Time Option
This option allows you to reduce
washing time at the washing process.
The first time you touch Favourite button,
a factory set Favourite wash program will
load for you. If you want to use the
Favourite program shown on the display
screen without making any changes,
touch Start/Hold To Pause ( ) to begin
your wash.
To reprogram Favourite with your own
selections and save them, proceed by
putting machine in pause mode and
follow following instructions.
To recall the Favourite wash program,
touch once and release the Favourite
button.
On the screen, you will get acknowledge-
ment that Favourite program is loaded.
You can recall a Favourite wash program
ONLY when the washing machine is:
Otherwise touching Favourite will have
no effect.
Save Favourite
in the program selection mode or
at any stage of a wash program in
pause mode.
Touch the Favourite button to enter
reprogramming mode.
Make desired selections on all other
buttons.
To EXIT reprogramming mode and
NOT save changes, touch Start/Hold
To Pause ( ) button.
17