User manual

Display
Machine In Pause Mode
You can tell when your washing machine
is in PAUSE mode. The message “ ”
is displayed.
The display showns the following
information:
Estimated time of the selected
program
End Of Program
Alarm Codes
Incorrect Option Selection
After selecting a program, the estimate
time is displayed in hours and minutes
(for example ).
The estimate time is calculated
automatically on the basis of the
maximum recommended load for each
type of fabric.
In the event of operating problems,
some alarm codes can be displayed, for
example (see “Troubleshooting”
and “Troubleshooting fault displays” on
page 27, 28).
When the program is completed the 4
zeros will flash.
If an option which is not compatible
with the set wash program is selected,
the message “ ” is displayed for
about 2 seconds and 3 consecutive
short beeps
After the program has started, the time
remaining is updated every minute.
ERR
SP
2.05
19