User manual

Problem Possible CausesDisplay Code What to do
Clothes still dirty after
wash program.
Scraping noise on
spin.
Humming, clicking
and other noises.
Not enough or no detergent.
Too many clothes in load.
Incorrect wash program or
temperature selected.
Incorrect water level
selected.
Bra wire or other thin items
caught between inner and
outer washbowls.
Bowl rotation at start of
wash.
Brake activation when
stopping after spin.
Check detergent use and
rewash clothes.
Remove some clothes and
rewash.
Reselect program or
temperature and rewash.
Use a higher water level.
If the item is visible, remove
it with pliers.
Use a wash bag in future.
Normal noise.
Normal noise.
TROUBLESHOOTING FAULT DISPLAYS
If you have a problem with your washing machine and before you call service, make
sure you have followed ALL of the instructions that may remedy the problem. You will
find instructions in the ‘Troubleshooting’ section and in the table below.
When the washing machine detects a problem that requires your attention, you will be
alerted. The machine will warn you of this problem by displaying a fault code in the
digital display, accompanied by “Beeping”.
Fault information and the action you should take are described in the following table.
Fault information and a guide for when you should call for service.
Description
Not filling with
water
Flood
Customer action (Summary)
If problem remains, call Service.
If the water is pouring onto the floor, turn OFF
both wall taps. Wait a few minutes to see if the
fault is corrected.
If not, call Service.
E30
Display Code
Make sure wall tap is on and hose filter are not
blocked. Raise drain hose if water is flowing out of
drain hose. Press ‘Start/Hold To Pause’ to re-start
wash.
Press and hold the “Start/Hold To Pause” button
for 1.2 seconds to PAUSE machine.
28