User manual

4.2.8. End of the programme

When the selected programme is over, the appliance stops

automatically and the timer knob stays on a stop-position

(the control lamp lights off) or on a rinse hold position.

The programmes end :

• by a spinning (for the cotton programmes).

• by a rinse hold (for the synthetics, delicate and wool pro-

grammes). You can finish these programmes by choo-

sing either the Spinning programme, either the Draining

programme taking care to release the on/off pushbutton

before doing your choice.

At the end of the cycle, release the on/off pushbutton to

switch the appliance off. Release any other pushbuttons that

are pressed in. Pull out the electricity plug and close the wa-

ter supply tap.

Note: we recommend that you should leave the lid and the

drum open after use to air the washing drum.