EWW1042ADWA WASHER - DRYER USER MANUAL WI-FI CONNECTIVITY SETUP 2 45
www.electrolux.com IMPORTANT INFORMATION THAT MAY IMPACT YOUR MANUFACTURER’S WARRANTY Adherence to the directions for use in this manual is extremely important for health and safety. Failure to strictly adhere to the requirements in this manual may result in personal injury, property damage and affect your ability to make a claim under the Electrolux manufacturer’s warranty provided with your product. Products must be used, installed and operated in accordance with this manual.
5. DAILY USE - WASHING (Only) Loading The Laundry................... 19 Using Detergent And Additives ... 19 Options Setting............................ 20 Starting A Cycle ( ) ................. 21 Interruption Of A Program ........... 21 Changing A Program................... 21 Changing The Options ................ 21 Opening The Door....................... 21 At The End Of The Program........ 22 When The Washing Program Is Completed, But There Is Water In The Drum...................... 22 5.
1. www.electrolux.com SAFETY INFORMATION 1.1 Conditions Of Use This appliance is intended to be used in household and similar applications such as: ● ● ● ● ● staff kitchen areas in shops, offices and other working environtment; farm houses; by clients in hotels, motels, and other residential type environments; bed and breakfast type environtments; areas for communal use in blocks of flats or in launderettes.
1.2 Child Safety ● This Wahser-Dryer is not intended for use by young children or infirm persons without supervision. ● Young children should be supervised to ensure that they do not play with the appliance. ● The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children’s reach. ● Keep all detergents in a safe place out of children’s reach. Make sure that children or pets do not climb into the drum.
www.electrolux.com ● Under no circumstances should you For safety reasons do not use double adaptors, extension cords and multi-plug adapters. attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts. 1.4 Installation ● This appliance is heavy. Care should be taken when moving it. 1.5 Use ● Only wash fabrics which are designed to be machine washed.
● The users should always check that they have not left their gas lighters (disposable or otherwise) in their clothing. ● Never tumble dry items which have had contact with chemicals such as dry cleaning fluid. These are of volatile nature and could cause an explosion. Only tumble dry items which have been washed in water or require airring. ● Plastic detergent dispensers should not remain in the drum during the drying cycle, as the plastic used is not designed to withstand the heat.
www.electrolux.com 2. PRODUCT DESCRIPTION 2.
Detergent/Softener Dispenser (For more informations, see page 19, 29) Transit Bolt (when remove) Prewash Main Wash Softener Door (when open) (for more informations, see page 19) Drum Lifter Stainless Steel Washing Drum Transit bolts must be removed before using the appliance. 2.2 Accessories Plastic Caps To close the holes on the rear side of the cabinet after the removal of the transit bolts.
www.electrolux.com 3. CONTROL PANEL 3.
3.2 Program Chart Max. Program; Spin Temperature Speed range Max. Load Type of load and soil level (Dry Clothes) Wash Dry 6 kg White and coloured cotton. Cottons; Cold to 90°C 1400 rpm 10 kg Mixed; Cold to 60°C 1200 rpm 4 kg Bedding; Cold to 60°C 800 rpm 3 kg – Special program for one synthetic blanket, duvet, bedspread and so on. Sports; Cold to 40°C 1200 rpm 4 kg – A gentle program designed for mixed fabrics found in delicate clothes.
www.electrolux.com Program; Temperature range WashDry 60; 30°C, 40°C Favourite Max. Load Type of load and soil level Max. Spin (Dry Clothes) Speed Wash Dry 1200 1 kg Non-Stop washing and drying program for 1 kg rpm 3 - 5 shirts with lightly soil. – – – Recall you favourite program. 1) Energy Saver program with 40degC and 1400rpm is recommended for a full load of normally soiled cottons, and is the Water and Energy rating label program.
3.4 Options ( Select “ ” option to turn ON the sensors for the dirt and detergent residue. Wash/Dry Mode Touchpad This touchpad is used to select Program Mode of your machine. Program mode available are : ● Wash Only Mode (default) ● Wash and Dry Mode / ● Dry Only Mode If a mode is not compatible with program selected, the symbol “ will flash on display along with buzzer sound. ) Touchpad ” Changing a running program mode is possible only by switching off the machine.
www.electrolux.com Vapour ( ) Touchpad Select this option to add approximately 30 minutes of tumbling in vapour during the wash cycle. Vapour helps open fabric fibers up to allow laundry additives to release tough stains. The indicator of this option will be on. ● Vapour may not necessarily be visible inside the drum during a vapour wash cycle. Vapour is created below the drum and allowed to naturally rise into the clothes. ● Vapour may not be present during the entire vapour wash cycle.
Remote ( ) Touchpad This option allows you to connect washer-dryer to Wi-Fi network and to link it to your smart phone. By this functionality you can receive notifications, control and monitor your washer-dryer from your mobile devices. To connect the washer-dryer with your smart phone you need: ● Wireless network at home with internet connection enabled. ● Smart Phone connected to wireless network. WI-FI specification requirements: Frequency 2.
www.electrolux.com Time Dry ( ) Touchpad If you wish to carry out a timed drying program, keep pressing this touchpad until the desired time is reached. NOTE ● Maximum allowable timed drying changes based on wash program selected. ● The final time value is the total duration of the washing + detachment + drying cycles. ● At the end of the program the appliance performs the anti-crease phase for approximately 10 minutes.
3.5 Settings Save Favourite ( ) Program Program settings that are frequently used can be saved (e.g. Cotton, 60°C, 1200 rpm, with Prewash and Vapour). To program/re-program Favourite with your own selections and save them, proceed as follows: 1. Put machine in Stand-By mode. 2. Select your desired program settings. 3. To save favourite program, press and hold “Vapour ” touchpad about 2 seconds and you will hear “Bip, Bip” sound and “Favourite” LED is flashing.
www.electrolux.com To interrupt a program which is running, press this touchpad to pause the machine, the Start/Pause pilot light flashes. To restart the program from the point at which it was interrupted, press this touchpad again, the Start/Pause pilot light will stop flashing. 2. Add Clothes ( ) You can only add clothes when the icon “ ” shown on the display. To add clothes: 1. Pressing the “Start/Pause” touchpad to pause the program. 2.
5. DAILY USE - WASHING (Only) 5.1 Loading The Laundry 1. Turn the water tap on. 5.2 Using Detergent And Additives Please read “Detergents Type and Quantity of Detergent”on page 26 before use. 2. Connect the main plug to the main socket. 3. Press the On/Off button to turn on the Wahser-Dryer. Turn the knob to set a program. The Wahser-Dryer will propose a temperature and automatically select the spin value provided for the program you have chosen. 1.
www.electrolux.com When you use the liquid detergent − Do not use gelatinous or thick liquid detergents. − Do not put more liquid than the maximum level. − Do not set the “Prewash” phase. − Do not set the “Delay Start”. 2. Measure out the detergent and the fabric softener; − Pull out the dispenser drawer until it stops. − Measure out the amount of detergent required, pour it into the main wash compartment . − Close the drawer gently.
5.4 Starting A Cycle ( ) To start a program, press the Start/Pause touchpad. The corresponding pilot light will stop flashing and a default program duration will be displayed on the screen. After approx. 15 minutes from the start of a program: − The appliance will automatically adjust the selected program duration according to the type and size of the load. − The display will show adjusted program duration.
www.electrolux.com 5.9 At The End Of The Program − − − − − − − − The appliance stops automatically. The acoustic signal will operate. The display will show “ ”. The indicator of the touchpad Start/Pause goes off. The door lock indicator “ ” goes off. Remove the laundry from the appliance. Make sure that the drum is empty. Keep the door partly open, to prevent the mildew and odours. Turn off the water tap.
6. DAILY USE - DRYING (Only) 1. Press the On/Off button to turn on the machine. The water tap must be open and the drain hose must be positioned in the sink or connected to the drain pipe. 2. Load the laundry. Make sure the load size does not exceed the maximum drying capacity of the machine. 3. Turn the knob to set a wash program which can select drying option (refer to Program Chart on page 11), according to your clothes then press Wash/Dry Mode touchpad to switch your machine to Dry Only ( ) mode. 4.
www.electrolux.com 6. At the end of the program press the On/Off button to switch the machine off. At the end of each drying cycle, the temperature of your clothing will be high. For your safety, please leave the door open to let your clothes cool before removing your laundry. NOTE ● If you wish to open the door during the anti-crease phase or interrupt it, press Start/Pause touchpad. ● Some drying level options are not available for some programs.
8. WASHING HINTS 8.1 Sorting The Laundry Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. 8.2 Temperatures Temp Soil level 90°C For normally soiled white cottons and linen (e.g. teacloths, towels, tablecloths, sheets...). 60°C For normally soiled, colourfast 50°C garments (e.g. shirts, night dresses, pajamas....
www.electrolux.com Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times. Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips and a cotton cloth. Rust: oxalic acid dissolved in hot water or a rust removing product used in cold water.
Not enough detergent causes: the washload to turn grey, greasy clothes. Too much detergent causes: oversudsing, reduced washing effect, inadequate rinsing. Use less detergent if: you are washing a small load, the laundry is lightly soiled, large amounts of foam during washing. 9. DRYING HINTS 9.1 Preparing The Drying Cycle As a dryer, the appliance works on condensation principle.
www.electrolux.com 9.5 Additional Drying If the laundry is still damp at the end of the drying program, select a short drying cycle again. WARNING! Do not over dry the laundry in order to avoid creasing of fabrics or garments shrinking. 10. INTERNATIONAL WASH CODE SYMBOLS These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash Max. wash Max. wash Max. wash Max.
11. CARE AND CLEANING WARNING! You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. 11.1 External Cleaning 11.5 Cleaning The Dispenser Drawer The washing powder and additive dispenser drawer should be cleaned regularly. Remove the drawer by pressing the catch downwards and by pulling it out. Clean the appliance only with soap and warm water. Fully dry all the surfaces. CAUTION! Do not use alcohol, solvents or chemical products. 11.
www.electrolux.com Flush it out under a tap to remove any traces of accumulated powder. WARNING! 1. Disconnect the mains plug from the mains socket. 2. Do not remove the filter while the appliance is operating. Do not clean the drain pump if the water in the appliance is hot. The water must be cold before you clean the drain pump. To clean the drain pump: 1. Open the drain pump door. 11.
3. When the container is full of water, put the drainage duct back again and empty the container. Do step 2, 3 again and again until no more water flows out from the drain pump. 5. Remove fluff and objects from the pump (if there are any). 6. Make sure that the impeller of the pump can turn. If this does not occur, contact the service centre. 4. Push back the drainage duct and turn the filter counter-clockwise to remove it. 7. Clean the filter under the water tap.
www.electrolux.com 8. Put the filter back into the housing with exposed section facing up. Make sure that you correctly tighten the filter to prevent leakages. 3. Clean the filter in the inlet hose with a stiff brush. 4. Remove the inlet hose behind the appliance. 5. Clean the filter in the valve with a stiff brush or a towel. 6. Install the inlet hose again. Make sure that the couplings are tight to prevent leakages. 7. Open the water tap. Guide 9. Close the drain pump door. 11.
11.9 Frost Precautions If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. Emergency Drain 1. Disconnect the main plug from the main socket. Turn off the water tap. 2. Remove the water inlet hose. 3. Remove the drain hose from the rear support and unhook it from sink or spigot. 4. Put the end of the drain and inlet hose in a container. Let the water flow out of the hoses. 5.
www.electrolux.com 12. TROUBLESHOOTING 12.1 Possible Failures Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please check troubleshooting. Alarm Code: Once the problem has been eliminated, press the Start/Pause button to restart the program. If after all checks, the problem persists, contact your local Service Centre.
Malfunction Machine does not empty and/or does not spin: There is water on the floor: Unsatisfactory washing results: The door will not open: Machine vibrates or is noisy: Possible cause Solution The drain hose is squashed or kinked. (Error code: ) Check the drain hose connection. The drain pump is clogged. (Error code: ) Clean the drain filter. The option “Rinse Hold” has been selected. Press Start/Pause touchpad to drain the water or select spin program.
www.electrolux.com Malfunction Machine vibrates or is noisy: Cycle time longer than displayed: The cycle is shorter than the time displayed. Spinning starts late or machine does not spin: Machine makes an unusual noise: No water is visible in the drum: Possible cause Solution The laundry is not evenly distributed in the drum. Pause the machine and redistribute laundry manually. There is very little laundry in the drum. Load more laundry. Unstable floors eg. wooden floors.
Malfunction Possible cause Solution The “Time Dry” or the “Dryness Level” degree has not been selected. Select the drying time or the dryness level degree. The water tap is not turned on. (Error code: ) Open the water tap. The drain filter is clogged. (Error code: ) Clean the drain filter. The machine is overloaded. Reduce the laundry load in the drum. The selected drying program, time or dryness level was not suitable for the laundry.
www.electrolux.com 12.2 Emergency Door Opening In case of power failure or appliance failure, the appliance door remains locked. The wash program continues when power is restored. If the door remains locked in case of failure, it is possible to open it using the emergency unlock feature. Before opening the door: WARNING! Make sure that the water temperature and the laundry are not hot. Wait until they cool down if necessary. Make sure that the water level inside the drum is not too high.
13. TECHNICAL DATA Dimensions (Height / Width / Depth) 85 X 60 X 65.9 cm Power supply (Voltage / Frequency) 220-240 V~ / 50 Hz Total power absorbed Wash: 2100 W / Dry: 1500 W Water supply pressure (Maximum / Minimum) 0.8 MPa / 0.05 MPa Washing Maximum dry clothes capacity Spin speed (Maximum / Minimum) Cottons Mixed Bedding Sports Energy Saver Vapour Refresh App Program Spin Rinse + Spin Quick 15 Daily 60 Wool Delicates WashDry 60 Favourite 10 kg 4 kg 3 kg 4 kg 10 kg 1.5 kg – 10 kg 10 kg 1.
www.electrolux.com 2. Remove the cardboard top. 3. Remove the polystyrene packaging materials. 4. Remove the plastic bag which cover the machine. 6. Put one of the polystyrene packaging elements on the floor behind the appliance. Carefully put down the appliance with the rear side on it. Make sure not to damage the hoses. 7. Remove the polystyrene base. 5. Open the door. Remove all the items from the drum. 8. Pull up the appliance in vertical position. 9.
A 10. Remove the three transit bolts. 11. Pull out the plastic spacers. 14.2 Positioning It is important that your Wahser-Dryer stands firm and leveled on the floor to ensure correct operation. The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to avoid restricting the Wahser-Dryer door. Use a spirit level on the top and side of the Wahser-Dryer to check the levels. 12. Put the plastic caps in the holes (X3).
www.electrolux.com Loosen or tighten the feet to adjust the level. A correct adjustment of the appliance level prevents vibration, noise and the movement of the appliance when in operation. clockwise “DOWN” 14.3 Water Inlet Connect the water inlet hose to a tap with 3/4” BSP thread. Use the hose supplied with the Wahser-Dryer. DO NOT USE OLD HOSES. check counter clockwise “UP” When the Wahser-Dryer is levelled, try to rock it from corner to corner.
In a sink, drain pipe branch. Fitting Hose Guide Pull apart to insert hose. 450 approx. 1. Hose Guide bend hose pull hose 2. Adjust length to suit trough. This branch must be above the trap so that the bend is at least 60 cm above the ground. Max. 90 cm Min. 60 cm Push the drain hose onto the spigot and secure with a clamp, ensure a loop is formed in the drain hose to prevent waste from the sink entering the appliance.
www.electrolux.com 14.5 Electrical Connection This machine is designed to operate on a 220-240 V, single-phase, 50 Hz supply. “An incorrect power supply may void your warranty.” Check that your domestic electrical installation can take the maximum load required (refer page 39), also taking into account any other appliances in use. Should the appliance power supply cable need to be replaced, this shall be carried out by our Service Centre.
16. WI-FI CONNECTIVITY SETUP This chapter describes how to connect the smart appliance to the Wi-Fi network and to link it to a mobile devices. By this functionality you can monitor and control your laundry appliance from your mobile devices. To connect the appliance to enjoy the full range of features and services you need: Wireless network at home with internet connection enabled. Mobile device connected to wireless network. Frequency 2.
www.electrolux.com 7. Connect your Washer-Dryer to your home Wi-Fi. You’ll need to select your Wi-Fi network name and input your password. For iOS devices, you will then be prompted go to ‘SETTINGS’ on your phone and select your Home Wi-Fi, then return to the Electrolux Life App. If the connectivity is configured, (Access Point) symbol is off and the icon will stop blinking and lit steadily to confirm that the configuration was successful.
G0021599-002-A12317394 www.electrolux.
