User manual

22 www.electrolux.com
●
●
●
●
DAILY USE - WASHING & DRYING7.
NOTE
Load the laundry and add detergent
and fabric softener.
1.
Load the laundry and add detergent and
fabric softener.
1.
Turn the knob to set a wash program you
require.
2.
Turn the knob to set a wash program
you require.
2.
Select the required options by
pressing the relevant touchpads. If
possible, do not select a spin speed
lower than that proposed by the
machine to avoid unnecessary longer
drying time therefore saving energy.
3.
Set the drying time by pressing
“Dry Time ” touchpad repeatedly until
desired drying time reached. The display
will then show the whole duration of
wash & dry cycle.
4.
Start the program by pressing Start/Pause
touchpad. The time remaining is updated
every minute on the display.
5.
At the end of the program turn the
program selector knob to the position
“Off” to deactivate the appliance.
6.
Select the required options by pressing
the relevant touchpads. If possible, do
not select a spin speed lower than that
proposed by the machine to avoid
unnecessary longer drying time therefore
saving energy.
3.
Set the dryness level by pressing
“Dryness ”. The display will then
show the whole duration of wash &
dry cycle.
4.
Start the program by pressing
Start/Pause touchpad. The time
remaining is updated every minute on
the display.
5.
At the end of the program turn the
program selector knob to the position
“Off” to deactivate the appliance.
6.
NON-STOP program: Washing
Program + Dryness Option
NON-STOP program: Washing
Program + Dry Time Option
NOTE
Some drying level options are not
available for some programs.
If you set only 15 minutes of drying,
the appliance performs only a cooling
phase.
●
When “Iron Dry ” option is selected,
the display time will be adjusted after
approximately 15 minutes from the start
of the program, based on the laundry
type and load size. The display will
show the new adjusted time
●
When “Cupboard Dry ” or “Extra
Dry ” is selected the display time
will be adjusted towards the end of
the drying cycle when machine
senses required dryness level has
been achieved. In case of laundry
quantity lower than maximum load
capacity, the time remaining can
suddenly decrease from e.g.
approximately minutes to .
If you wish to open the door during the
anti-crease phase or interrupt it, press
any button.
If you wish to open the door during
the anti-crease phase or interrupt it,
press any button.
7.1
7.2
At the end of each drying cycle,
the temperature of your clothing will
be high. For your safety, please
leave the door open to let your
clothes cool before removing your
laundry.
At the end of each drying cycle,
the temperature of your clothing will
be high. For your safety, please leave
the door open to let your clothes cool
before removing your laundry.