User manual

Press to start the program.
22 www.electrolux.com
To achieve the best drying
results the appliance will
not allow you to set spin
speed lower than minimum
required.
Some drying level options are
not available for some drying
programs.
During the last minutes of the
drying cycle the appliance
performs the anti-crease and
the cooling phases.
Press to set the drying time
value. Keep pressing to add
drying time.
After a few seconds the
display shows the final time
value eg: , that is the
total duration of the washing
and drying cycles (washing +
drying + anti-crease).
The display shows a time value
based on the default load size. If the
amount of your laundry is more or
less than the default size, the
appliance will adjust the time value
automatically during the cycle.
The display shows the door locked
indicator ‘ ’. The drying indicator
‘ ’ starts to flash.
The display shows the set drying
value time, eg: value.
The indicator ‘ ’ comes on in
the display.
Press to start the program.
In the display the indicator ‘ ’
comes on. The door is locked.
In the display the indicator of the
selected dryness level stays on.
The door locked indicator goes on.
Press the On/Off button to turn on the
machine.
Select a drying program.
The display shows the default drying
level.
Press until the display shows the
desired dryness level. (See section
3.15)
Press to start the program.
The drying indicator ‘ ’ starts to
flash. The display shows the door
locked indicator ‘ ’.
Load the laundry, one item at a time.
Washing & Timed Drying
Automatic Dryness Levels: Dry Time:
6.3
DAILY USE - DRYING7.
Press repeatedly to set the
time value. (See section 3.16)
Each time you press this touchpad
the time value increases by 5 minutes.
Make sure water tap is
opened and drain hose is in
the sink or connect to the
drain pipe.
WARNING!
If you set only 13 minutes of
drying, the appliance performs
only a cooling phase.