User manual

Fitting under a counter
Before any work to the appliance, you
must disconnect the plug from the
power socket.
Important!
For safety reasons, it is dangerous
to fit the appliance under a counter
without the steel plate, which you
can order in your nearest Service
Force Centre.
The top must be fixed to the cabinet as
follows:Unscrew the screws from the
back panel of the appliance. Push the
worktop to the back and raise it to
remove (see the pictures below).
820
600
600
600
595
820
P1240
Building-in
This appliance has been designed to
be built into the kitchen furniture.
The recess should have the dimen-
sions shown in picture A.
When installing the appliance into the
kitchen furniture ensure, if possible, the
hoses are placed in either of the two
recesses on the back of the appliance.
This will help to prevent the hoses from
becoming kinked or trapped. Picture
AB.
P0965
820 min
570
min.
600
596
416
176,5
818
541
195
490
160
120
90
8
515
165
A
600
installation electrolux 39
132966410_GB.qxd 10/01/2008 9.35 Pagina 39