User manual

Follow these steps if the drying re-
sults are not satisfactory:
1. Fill the rinse aid dispenser with
rinse aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to position
2.
• You can only activate or deactivate
the rinse aid dispenser when the
multitab function is activated.
To activate/deactivate the rinse aid
dispenser:
1. Switch on the appliance.
2. Make sure that the appliance is in set-
ting mode.
3. Press and hold function buttons B and
C.
– The indicator lights for function but-
tons A, B, and C start to flash.
4. Press function button B.
– The indicator lights for function but-
tons A and C go off.
– The indicator light for function button
B continues to flash.
– The digital display shows the setting.
Rinse aid dispenser
deactivated
Rinse aid dispenser
activated
5. Press function button B again.
– The digital display shows the new
setting.
6. Switch off the appliance to save the op-
eration.
To use normal detergent again:
1. Deactivate the multitab function.
2. Fill the rinse aid dispenser.
3. Adjust the rinse aid dosage.
SELECT AND START A WASHING PROGRAM
Set the washing program with the door
ajar. The washing program only starts
after you close the door. Until then it is
possible to modify the settings.
Follow these steps to set and start a wash-
ing program:
1. Switch on the appliance.
2. Make sure that the appliance is in set-
ting mode.
3. Press one of the program buttons. Re-
fer to the 'Washing programs' chart for
program details.
– The indicator light of the selected
program stays on. All other program
indicator lights go off.
– The digital display shows the pro-
gram duration.
4. Close the door.
– The washing program starts.
When the washing program operates,
you cannot change the program. Can-
cel the washing program. Refer to
'Cancelling a washing program'.
Select and start a washing program
with delay start
1. Press the on/off button.
2. Set a washing program.
– The program indicator light comes
on.
3. Press the delay start button until the
display shows the necessary delay start
of the washing program.
– The delay start indicator light comes
on.
4. Close the door.
– The countdown of the delay start
starts.
– When the countdown is completed,
the washing program starts automat-
ically.
If you open the door during the count-
down, it will interrupt the countdown.
When you close the door again, the
countdown continues from the point of
interruption.
Cancelling a delay start
1. Press and hold function buttons B and
C until all the program lights come on.
– When you cancel a delay start, you
also cancel the washing program.
2. Set a new washing program.
electrolux 11