Service manual

20
C
Type I
26.5"~48.0"
Type II
22.1"~38.6"
3. Cut the foam seal (adhesive type) to the proper length and attach it on the top of the window. Show as
in Fig.6
4. Close the window sash securely against the window.
5. Cut the foam seal to an appropriate length and sealing the open gap between the top window sash
and outer window sash. Show as in Fig.7
1. Cut the foam seal (adhesive type) to the proper length and attach it to the window frame. See Fig.8.
Installation in a sliding sash window