Installation Instructions

9
Unpacking Washer
HOT Water Hose
CALIENTE
CHAUDE
COLD Water Hose
FRIA
FROIDE
x7
Removing shipping hardware
Installing hole plugs
For 300 Series:
Remove all of the following:
4 SHIMS
4 BLACK SPACERS
3 P CLAMPS
4 BOLTS
For 400, 500, and 600 Series:
Remove all of the following:
1 WHITE SPACER
1 SHIPPING FORK
5 SHIMS
4 BLACK SPACERS
4 P CLAMPS
5 BOLTS
HOT Water Hose
CALIENTE
CHAUDE
COLD Water Hose
FRIA
FROIDE
Black Spacers
White Spacer
(on select models)
P Clamps
Shipping Fork
(on select models)
Bolts
Shims
IMPORTANT
Failure to remove shipping hardware completely could result in damage to the appli-
ance, damage to your home, or unexpected washing results.
Save all shipping bolts and spacers for future use. If the washer is to be transported at a
later date, the shipping hardware must be reinstalled to help prevent shipping damage
NOTE
Rubber expansion material on spacers may need time to relax before they can be easily
pulled through shipping hole.
Locate hole plugs in the small bag sup-
plied with washer instruction guides. Insert
them in the holes in the washer back panel
where the shipping hardware has been
removed.