User manual

5. Clean the glass panel with water and
soap. Dry the glass panel carefully.
When the cleaning is complete, install
the glass panels and the oven door. Do
the above steps in the opposite
sequence. Install the smaller panel first,
then the larger.
CAUTION!
The screen with a printing on
the inner glass panel must
face the inner side of the
door.
CAUTION!
Make sure that after
installation the surface of the
frame of the glass panel on
the screen with a printing is
not rough when you touch it.
CAUTION!
Make sure that you install
the internal glass panel in
the appropriate seats.
13.5 Removing the drawer
WARNING!
Do not keep flammable
items (such as cleaning
materials, plastic bags, oven
gloves, paper or cleaning
sprays) in the drawer. When
you use the oven, the
drawer can become hot.
There is a risk of fire.
The drawer below the oven can be
removed for cleaning.
1. Pull the drawer out until it stops.
2. Slowly lift the drawer.
3. Pull the drawer out fully.
To install the drawer, do the above steps
in the opposite sequence.
13.6 Replacing the lamp
Put a cloth on the bottom of the interior
of the appliance. It prevents damage to
the lamp glass cover and the cavity.
WARNING!
Danger of electrocution!
Disconnect the fuse before
you replace the lamp.
The lamp and the lamp glass
cover can be hot.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box
or deactivate the circuit breaker.
The back lamp
1. Turn the lamp glass cover
counterclockwise to remove it.
2. Clean the glass cover.
3. Replace the lamp with a halogen,
230 V, 40 W, 300 °C heat resistant
lamp.
4. Install the glass cover.
ENGLISH 23